userdoc:board_qotom_q530g6

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
userdoc:board_qotom_q530g6 [2018/07/07 19:20] – abelbeckuserdoc:board_qotom_q530g6 [2025/03/05 16:28] (current) – [Qotom Q530G6 Core i3-6100U Fanless Appliance] abelbeck
Line 4: Line 4:
  
 **Board Specifications:**  [[https://doc.astlinux-project.org/_media/userdoc:qotom-q530g6-motherboard-info.pdf|Q3855UG6-P Motherboard]] **Board Specifications:**  [[https://doc.astlinux-project.org/_media/userdoc:qotom-q530g6-motherboard-info.pdf|Q3855UG6-P Motherboard]]
 +
 +  * 6x Intel I211 NICs (1G/100M/10M speeds)
  
 **AstLinux Board Type:** **AstLinux Board Type:**
Line 17: Line 19:
 **Total System Power (no HDMI connection):**  6 Watts when idle. **Total System Power (no HDMI connection):**  6 Watts when idle.
  
-**Performance:**  11.7 secs. (Maximum OpenVPN: 310 Mbps)+**Performance:**  12.5 secs. (Single-core test, lower is better) 
  
-  openvpn --genkey --secret /tmp/secret +  time ( echo "scale=3456; 4*a(1)" | bc -l )
-  time openvpn --test-crypto --secret /tmp/secret --verb 0 --tun-mtu 20000 --cipher aes-256-cbc+
  
 **Configuration:** **Configuration:**
Line 42: Line 43:
  
 \\ \\
 +===== BIOS Settings =====
 +
 **BIOS Setup for Restore AC Power Loss:** **BIOS Setup for Restore AC Power Loss:**
  
 The Energy-Related Products Directive (ERP) is the European Commission Directive required for products sold and exported to the EU.  As such the Qotom Q530G6 does not automatically power on after a power failure.  Obviously this //feature// needs to be disabled. The Energy-Related Products Directive (ERP) is the European Commission Directive required for products sold and exported to the EU.  As such the Qotom Q530G6 does not automatically power on after a power failure.  Obviously this //feature// needs to be disabled.
  
-On startup (quickly) press the <DEL> key to enter the BIOS Setup, go to the "Chipset" -> "PCH-IO Configuration" .  Make the following changes...+On startup (quickly) press the ''<ESC>'' key to enter the BIOS Setup, go to the "Chipset" -> "PCH-IO Configuration" .  Make the following changes...
  
   * ''Restore From AC Power Loss -> Power On''   * ''Restore From AC Power Loss -> Power On''
Line 90: Line 93:
 Save the above BIOS changes, reboot. Save the above BIOS changes, reboot.
  
-**Photos:**+!!Tip ->!! If you need to choose the boot drive, for example when booting the ISO Installer via a USB drive, on startup (quickly) press the ''F11'' key. 
 + 
 +===== Photos =====
  
 {{:userdoc:qotom-q530g6-network.jpg?nolink|Network}} {{:userdoc:qotom-q530g6-network.jpg?nolink|Network}}
Line 97: Line 102:
  
 {{:userdoc:qotom-q530g6-inside.jpg?nolink|Inside}} {{:userdoc:qotom-q530g6-inside.jpg?nolink|Inside}}
 +
 +===== Qotom Q515G6 =====
 +
 +There is also a similar [[http://www.qotom.net/product/28.html|Q515G6]] version with a Celeron 3865U (2 cores 1.8 GHz, no HT).
 +
 +**Performance:**  15.4 secs. (Single-core test, lower is better) 
 +
 +  time ( echo "scale=3456; 4*a(1)" | bc -l )
  
 \\ \\
  • userdoc/board_qotom_q530g6.1530991203.txt.gz
  • Last modified: 2018/07/07 19:20
  • by abelbeck