Differences

This shows you the differences between two versions of the page.

--- userdoc:new-install [2022/03/13 12:53] – [New Installation] mkeuter
+++ userdoc:new-install [2025/07/17 12:59] (current) – [New Installation] abelbeck
@@ Line 7: / Line 7: @@
   * Boot the ISO Installer image (ISO CDROM) within a Virtual Machine and install to a virtual disk.
   * Mount the ISO Installer image and manually extract the desired .img.gz file from the "os" directory, ''gunzip'' and ''dd'' to a destination disk.
+  * (UEFI only) Mount the ISO Installer image and manually, recursively copy all files to a FAT32/Master-Boot-Record USB drive.
 **Typical New Installation:**
@@ Line 13: / Line 14: @@
   - Transfer the ISO image to a USB flash drive:
     * On Linux or *BSD use ''dd'' to transfer the image, where sdX is your USB flash drive\\ ''$ dd if=astlinux-xxx-board.iso of=/dev/sdX''
-    * On Windows boxes, use [[https://rufus.akeo.ie/?locale=en_US|Rufus]] (Write in "DD Image" mode). {{:userdoc:rufus-img-gz.png?linkonly|Rufus}} can also write ''*.img.gz'' images. \\ !!Note:!! Rufus **3.17.1846** has a [[https://github.com/pbatard/rufus/issues/1877|security issue]], should be fixed in 3.18.
+    * On Windows boxes, use [[https://rufus.akeo.ie/?locale=en_US|Rufus]] (Write in "DD Image" mode). {{:userdoc:rufus-img-gz.png?linkonly|Rufus}} can also write ''*.img.gz'' images. \\ !!Note:!! Rufus **3.17.1846** has a [[https://github.com/pbatard/rufus/issues/1877|security issue]], should be fixed in [[https://rufus.akeo.ie/?locale=en_US|3.18]].
-    * On Mac OS X boxes, use [[https://abelbeck.com/lonnie/astlinux/info/os-x-cf-write.php|os-x-cf-write]].
+    * On macOS boxes, use [[https://abelbeck.com/lonnie/astlinux/info/os-x-cf-write.php|os-x-cf-write]].
     * On Chrome OS boxes, use [[https://abelbeck.com/lonnie/astlinux/info/chromeos-ssd-write.php|chromeos-ssd-write]].
+    * (UEFI only) Copy the ISO Installer image contents to a FAT32/Master-Boot-Record USB drive, macOS example:\\ ''$ cp -a /Volumes/ASTLINUX_ISO/* /Volumes/ASTLINUXFAT/''
   - Boot using the USB flash drive, follow the menu to install to an internal disk.
     * !!Note ->!! Serial console ISO images (-serial.iso) use serial settings of ''19200n8''.
@@ Line 117: / Line 119: @@
 When focusing on a specific x86 board or appliance, often useful configurations and tweaks can be performed to optimize the hardware for use with AstLinux.  The link below will take you to a list of tested hardware with configuration recommendations and photos.
-Specific Tested Hardware: **[[documentation#generic_x86_boards_and_appliances|Generic x86 Boards and Appliances]]**
+Specific Tested Hardware: **[[documentation#generic_64-bit_x86_64_boards_and_appliances|Generic 64-bit, x86_64 Boards and Appliances]]**
 !!Tip ->!! Even if your exact hardware is not in the list, if you find a listing with a matching processor and chipset it may still be useful.