userdoc:openvpn_access

OpenVPN Access Policies

Configuring client-specific rules and access policies

Here is a good howto for this:

https://openvpn.net/index.php/open-source/documentation/howto.html#policy

Additionally in AstLinux the following must be done:

  • In the Firewall config “Allow OpenVPN Server tunnel to xx LAN Interface” must not be checked!
  • The iptables rules should be put into /mnt/kd/arno-iptables-firewall/custom-rules file into the FORWARD_CHAIN.
  • Because the limited users have still access to the Astlinux server itself, you could either
    • create a Firewall rule like Deny LAN→Local - Proto TCP/UDP - Source 10.8.2.0/24 - Port 0-65535 for each of the limited virtual subnets
    • or create another iptables rule: iptables -A INT_INPUT_CHAIN -s 10.8.2.0/24 -j DROP for each subnet
  • The easy way is to push the internal LAN route in the OpenVPN server config (push “route 192.168.3.0.255.255.255.0” in this case).
  • The more secure way is NOT to push the route in the OpenVPN server config, but instead push only the relevant allowed destinations in the OpenVPN ccd/client file like push “route 192.168.3.200”, but in this case the “Employees Class” from the example wouldn't work, cause there is no file to include the routing.

Examples

OpenVPN Server Config

OpenVPN Policies

Note: It is very important that Topology “Use Default” is used and NOT “Subnet”!

/mnt/kd/arno-iptables-firewall/custom-rules

# Put any custom (iptables) rules here down below:
##################################################

# Employee rule
iptables -A FORWARD_CHAIN -i tun0 -s 10.8.0.0/24 -d 192.168.3.100 -j ACCEPT
iptables -A INT_INPUT_CHAIN -s 10.8.0.0/24 -j DROP

# Sysadmin rule
iptables -A FORWARD_CHAIN -i tun0 -s 10.8.1.0/24 -d 192.168.3.0/24 -j ACCEPT

# Contractor1 rule
iptables -A FORWARD_CHAIN -i tun0 -s 10.8.2.0/24 -d 192.168.3.200 -j ACCEPT
iptables -A INT_INPUT_CHAIN -s 10.8.2.0/24 -j DROP

/mnt/kd/openvpn/ccd/sysadmin

ifconfig-push 10.8.1.1 10.8.1.2
;push "route 192.168.3.0 255.255.255.0"

/mnt/kd/openvpn/ccd/contractor1

ifconfig-push 10.8.2.1 10.8.2.2
;push route 192.168.3.200

The “push route …” commands are optional (without the “;”)(see above)

  • userdoc/openvpn_access.txt
  • Last modified: 2017/08/10 03:43
  • by droemel