Differences

This shows you the differences between two versions of the page.

--- userdoc:tt-bridges [2012/10/21 13:39] – abelbeck
+++ userdoc:tt-bridges [2023/07/27 16:33] (current) – mkeuter
@@ Line 1: / Line 1: @@
 ====== Network-Bridges (BRIDGE0) ======
-When you setup a software network bridge in AstLinux, you need to careful to not lock out your network connection:
+!!Note:!! This is outdated documentation, since AstLinux starting with 1.3.10 (07/2020) dynamically adds VLAN and BRIDGE entries to the interface list.
-**Q:** When I enter ''BRIDGE0="eth0 eth3"'' in the user.conf and reboot, why is then ''eth0'' not reachable over the network ?
+----
+!!When you setup a software network bridge in AstLinux, you need to be careful to not lock out your network connection:!!
+**Q:** When I enter
+  BRIDGE0="eth0 eth3"
+in the ''user.conf'' and reboot, why is then ''eth0'' not reachable over the network ?
 **A:** If eth0 was on the external interface, you would also need to set (temporarily):
@@ Line 9: / Line 17: @@
   EXTIF="br0"
-**or** if eth0 was on the 1st internal interface:
+**or** If eth0 was on the 1st internal interface:
   INTIF="br0"