userdoc:board_jetway_jbc430u941

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
userdoc:board_jetway_jbc430u941 [2022/05/03 12:31]
abelbeck
userdoc:board_jetway_jbc430u941 [2025/03/05 10:31] (current)
abelbeck
Line 4: Line 4:
  
 **Board Specifications:**  [[https://www.jetwaycomputer.com/JBC430U941.html|JBC430U941 / HBJC430U941]] [[https://www.jetwaycomputer.com/spec/JBC430U941.pdf|Datasheet]] **Board Specifications:**  [[https://www.jetwaycomputer.com/JBC430U941.html|JBC430U941 / HBJC430U941]] [[https://www.jetwaycomputer.com/spec/JBC430U941.pdf|Datasheet]]
 +
 +  * 4x Intel I211 NICs (1G/100M/10M speeds)
  
 **AstLinux Board Type:** **AstLinux Board Type:**
Line 50: Line 52:
  
 \\ \\
-**BIOS Setup for Boot Option Filter (non-UEFI):**+**BIOS Setup for Boot OS Selection (non-UEFI):**
  
-While in the BIOS Setup as above, check to make sure Legacy only boot is enabled, go to the "Advanced" -> "CSM Configuration" menu...+While in the BIOS Setup as above, to enable Legacy boot, go to the "Advanced" -> "CSM Configuration" menu...
  
   * ''Boot Option Filter -> Legacy Only''   * ''Boot Option Filter -> Legacy Only''
 +
 +\\
 +**BIOS Setup for Boot OS Selection (UEFI):**
 +
 +!!UEFI Boot requires AstLinux 1.4.6 or later!! - additionally RUNNIX 0.6.10 or later is needed.
 +
 +While in the BIOS Setup as above, to enable UEFI boot, go to the "Advanced" -> "CSM configuration" menu...
 +
 +  * ''Boot option filter -> UEFI Only''
  
 \\ \\
  • userdoc/board_jetway_jbc430u941.1651599113.txt.gz
  • Last modified: 2022/05/03 12:31
  • by abelbeck