Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_asterisk_upgrade_version [2024/01/31 14:56] – abelbeck
+++ userdoc:tt_asterisk_upgrade_version [2024/01/31 15:13] (current) – abelbeck
@@ Line 40: / Line 40: @@
 \\
-For Example, if you are currently at "astlinux-1.2.3 - Asterisk 11.18.0" and want to change to "astlinux-1.2.3 - Asterisk 13.4.0"
+For Example, if you are currently at "astlinux-1.n.n - Asterisk 16.x.x" and want to change to "astlinux-1.n.n - Asterisk 18.x.x"
 -- First --
@@ Line 60: / Line 60: @@
 [ Check for New ] - Firmware - x Confirm
-  You are running the newest available version: astlinux-1.2.3
+  You are running the newest available version: astlinux-1.n.n
 !!Note ->!! A Revert is required here since we are switching Asterisk versions while using the same AstLinux version.  If the latest AstLinux version was newer, the Revert is not necessary or suggested.
@@ Line 79: / Line 79: @@
 !!Note ->!! When changing Asterisk LTS series versions, be certain your Asterisk configuration is updated as well.  Below are links to the "UPGRADE" documentation in the Asterisk project.
-[[https://raw.githubusercontent.com/asterisk/asterisk/20/UPGRADE.txt|Upgrade Note for Asterisk 20 and earlier]]
+[[https://raw.githubusercontent.com/asterisk/asterisk/20.2/UPGRADE.txt|Upgrade Note for Asterisk 20 and earlier]]
-[[https://raw.githubusercontent.com/asterisk/asterisk/18/UPGRADE.txt|Upgrade Note for Asterisk 18 and earlier]]
+[[https://raw.githubusercontent.com/asterisk/asterisk/18.17/UPGRADE.txt|Upgrade Note for Asterisk 18 and earlier]]
-[[https://raw.githubusercontent.com/asterisk/asterisk/16/UPGRADE.txt|Upgrade Note for Asterisk 16 and earlier]]
+[[https://raw.githubusercontent.com/asterisk/asterisk/16.30/UPGRADE.txt|Upgrade Note for Asterisk 16 and earlier]]
 [[https://raw.githubusercontent.com/asterisk/asterisk/13/UPGRADE.txt|Upgrade Note for Asterisk 13 and earlier]]