Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_asterisk-gui [2012/04/09 16:18]
abelbeck
+++ userdoc:tt_asterisk-gui [2015/05/16 11:08] (current)
abelbeck [Using the Asterisk GUI]
@@ Line 4: / Line 4: @@
 The Asterisk GUI is an open source project created by [[http://www.digium.com/|Digium]], allowing the Asterisk configuration to be created, edited and managed via a web browser.  If you prefer to edit the Asterisk configuration via a text editor or via the Edit tab in the AstLinux Web Interface, do not use the Asterisk GUI without first understanding how the Asterisk GUI re-writes the configuration files.
+!!Note: Asterisk GUI is no longer supported with AstLinux 1.2.3 and later.!!
+===== Configuration Files =====
 Two files are key to allowing the Asterisk GUI to operate, located at:
@@ Line 9: / Line 12: @@
   * ''/mnt/kd/asterisk/http.conf'' (or a symlink as ''/etc/asterisk/http.conf'')
-===== manager.conf =====
+Additionally, if the file ''/mnt/kd/dahdi/system.conf'' does **not** exist, create it with the CLI command:
+  cp /stat/etc/dahdi/system.conf /mnt/kd/dahdi/system.conf
+===== Asterisk manager.conf =====
 The default ''manager.conf'' should contain these settings, without editing:
@@ Line 32: / Line 40: @@
 Be sure to change the password and possibly also uncomment/edit the deny/permit lines for added security.
-===== http.conf =====
+===== Asterisk http.conf =====
 The default ''http.conf'' should contain these settings, without editing: