Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_asterisk-fop2-install [2013/08/03 20:56]
abelbeck [Install FOP2 Add-On Package]
+++ userdoc:tt_asterisk-fop2-install [2013/08/04 07:54]
abelbeck
@@ Line 1: / Line 1: @@
 ====== Install FOP2 Add-On Package ======
-The FOP2 Add-On Package requires hardware with 512 MB or more of RAM.  FOP2 requires about 100 MB of RAM including AstLinux's RAM based /tmp/par-root/ files.
+The FOP2 Add-On Package requires hardware with 512 MB or more of RAM.  FOP2 requires about 100 MB of RAM including AstLinux's RAM based ''/tmp/par-root/'' files.
   * PC Engines Alix board, only 256 MB of RAM -> too little for FOP2 and other services.
@@ Line 49: / Line 49: @@
 and at the end of ''users.cfg'' add a line something like:
-  user=admin:astlinux:all
+  user=1234:4242:dial,transfer,pickup,meetme,preferences
 Finally, you can now create buttons with the ''buttons.cfg'' file.  Apply ''buttons.cfg'' file changes with "Reload Asterisk FOP2":
@@ Line 55: / Line 55: @@
 {{:userdoc:edit-tab-fop2-reload.jpg?nolink|Reload FOP2}}
-In the web interface, upper right corner, click **FOP2**:
+In the web interface, upper right corner, click on **FOP2**:
 {{:userdoc:all-tabs-fop2-link.png?nolink|FOP2 Link}}
@@ Line 101: / Line 101: @@
   callevents=yes
-Next, start the fop2 sevice with the following CLI commands:
+Next, start the fop2 service with the following CLI commands:
   asterisk -rx "manager reload"
@@ Line 115: / Line 115: @@
 Next, Edit the ''/etc/fop2/users.cfg'' file and at the end add a line something like:
-  user=admin:astlinux:all
+  user=1234:4242:dial,transfer,pickup,meetme,preferences
 Finally, you can now create buttons with the ''/etc/fop2/buttons.cfg'' file.  Apply ''buttons.cfg'' file changes with: