This is an old revision of the document!
Vultr KVM
Note: AstLinux 1.3.4 or later is required
VM Host Specifications: Vultr
AstLinux Board Type:
- “genx86_64-vm” (VGA video console)
VM Guest Recommended Options:
- Plan: Vultr Cloud Compute (VC2)
- Memory: 1 GB
- CPU: 1 Processor Core
- Virtual Storage: 25 GB
Configuration:
The configuration process could not be simplier, follow a few easy steps:
- Add ISO… upload AstLinux Installer ISO image to Vultr
- Deploy New Server… using Vultr Cloud Compute (VC2)
- Server Location: Select one from many across the world
- Server Type: Select “Upload ISO” → “My ISO's”, click on the AstLinux Installer ISO
- Server Size: Select the 1 CPU, 1024MB Memory for this example
- Additional Features: None is fine, check “Enable IPv6” if desired
- Server Hostname & Label: Define useful names for this instance
OK, let's begin …
Create a Vultr account and provide your billing information.
Add ISO… upload AstLinux Installer ISO image to Vultr
You can download the ISO directly from the AstLinux Project page, use the latest Guest VM x86-64bit (Video Console) version, for example the URL for version 1.3.4
:
https://s3.amazonaws.com/mirror.astlinux-project/downloads/iso/astlinux-1.3.4-genx86_64-vm.iso
It will take a minute to finish downloading.
Deploy New Server (Instance)… using Vultr Cloud Compute (VC2)
Server Location: Select one from many across the world
Server Type: Select “Upload ISO” → “My ISO's”, click (so the check-mark appears) on the AstLinux Installer ISO
Server Size: Select the 1 CPU, 1024MB Memory for this example
Additional Features: None is fine, check “Enable IPv6” if desired
Server Hostname & Label: Define useful names for this instance
Click “Deploy Now”
In less than a minute you will see the new instance “running”
Note -> The IPv4 address is dynamically assigned from a pool and remains static for the duration of a deployed instance, this example instance has since been destroyed so treat the IPv4 address mentioned below only as an example.
By clicking on the instance information you will get a larger overview
Click on the “View Console” icon it will open a console to the VM instance
Select the “Install” installer menu, follow the dialogs to install an AstLinux image to your virtual disk.
When finished you can select the “Shutdown” installer menu, (or don't as it will automatically reboot in the next step).
From the Vultr dashboard click “Settings” and “Custom ISO”, you sill see how to “Remove ISO”
Click on “Remove ISO”, following you will be prompted if you are sure. The ISO will be removed and the VM instance will be restarted.
Again using the “View Console” icon you will see AstLinux booting.
Finally, configure AstLinux using the normal setup.
Tip -> Note the “IPv4 Address:” on the screen and access the VM with SSH or an HTTPS browser from anywhere.
Warning -> It is important to enable the Firewall as soon as possible. Create rules with limited access for TCP ports 22,80,443 (SSH/HTTP/HTTPS) from trusted public addresses.