Differences

This shows you the differences between two versions of the page.

--- userdoc:guest_vm_vmware_vsphere [2017/06/23 12:56]
abelbeck
+++ userdoc:guest_vm_vmware_vsphere [2024/02/16 07:58] (current)
abelbeck
@@ Line 1: / Line 1: @@
 ====== VMware vSphere ESXi ======
-!!Note: AstLinux 1.2.5 or later is required!!
+!!Important ->!! (February 2024) End Of General Availability of the Free vSphere Hypervisor (ESXi 7.x and 8.x)
+[[https://kb.vmware.com/s/article/2107518|KB 2107518]]
 !!Note: AstLinux 1.3.0 or later is recommended!! as documented below.
+!!Note: AstLinux 1.4.0 or later requires ESXi 6.7 or later!!
 **VM Host Specifications:**  [[https://www.vmware.com/products/vsphere-hypervisor.html|VMware vSphere Hypervisor]]
@@ Line 29: / Line 32: @@
 {{:userdoc:vm_vmware_vsphere-web-login.png?nolink|Web Login}}
+The default host settings are shown below.
+!!Tip ->!! If you know what you are doing, this is a good time to create an additional "Virtual Switch" or two via the Networking tab on the left, but not needed for this example.
+Click on "Create/Register VM" to begin ...
 {{:userdoc:vm_vmware_vsphere-click-create-vm.png?nolink|Create VM}}
@@ Line 39: / Line 48: @@
 {{:userdoc:vm_vmware_vsphere-2-vm.png?nolink|Step 2}}
+"Next" shows the datastore storage available, nothing to do if there is only one.
 {{:userdoc:vm_vmware_vsphere-3-vm.png?nolink|Step 3}}
+"Next" select CPU [ 2 ], Memory [ 1024 MB ] and Hard disk [ 8 GB ]
+Then for the CD/DVD Drive select "Datastore ISO file" which you will be prompted to select the ISO image:
 {{:userdoc:vm_vmware_vsphere-4a-vm.png?nolink|Datastore ISO}}
+If you have not already done so, click on "Upload" the AstLinux Installer ISO to the datastore, then "Select" it.
+You should then see the final settings:
 {{:userdoc:vm_vmware_vsphere-4b-vm.png?nolink|Step 4}}
+"Next" gives you another, more detailed look at the settings:
 {{:userdoc:vm_vmware_vsphere-5-vm.png?nolink|Step 5}}
@@ Line 63: / Line 84: @@
 When finished select the "Shutdown" installer menu.
-After shutdown, Select "Edit", remove the CD/DVD Drive, by clicking on the (x) on the right ...
+After shutdown, click "Edit", and remove the CD/DVD Drive, by clicking on the (x) on the right ...
 {{:userdoc:vm_vmware_vsphere-edit-settings1.png?nolink|Edit Settings w/CDROM}}