Differences

This shows you the differences between two versions of the page.

--- userdoc:guest_vm_proxmox [2017/01/19 06:36]
droemel
+++ userdoc:guest_vm_proxmox [2018/09/29 10:02] (current)
mkeuter
@@ Line 1: / Line 1: @@
 ====== Proxmox VE ======
-!!Note: AstLinux 1.2.7 or later is required!!
+!!Note: AstLinux 1.2.7 or later is required (1.3.0 or later for 'VirtIO-SCSI')!!
 **VM Host Specifications:**  [[https://pve.proxmox.com/|Proxmox VE]]
 **AstLinux Board Type:**
@@ Line 18: / Line 18: @@
 **Configuration:**
-!!Note:!! __Screenshots from Proxmox version 4.1 (the WebGUI on newer versions looks slightly different!)__
+!!Note:!! These screenshots are from Proxmox version 4.1 (the WebGUI on newer versions looks slightly different!)
 Using an HTTPS web browser login into the Proxmox WebGUI, typically using port ''8006'', then upload the AstLinux Install ISO to your local storage...
@@ Line 40: / Line 40: @@
 {{:userdoc:guest_vm_proxmox-create-vm-cd-dvd.jpeg?nolink|CD/DVD}}
 "Next" change the Bus/Device: to SATA and set the Disk size to 4 or 8 GB:
+!!Tip ->!! Since AstLinux 1.3.0 'SCSI' should be used as Bus and 'VirtIO SCSI' as SCSI Controller (Proxmox default!)
 {{:userdoc:guest_vm_proxmox-create-vm-harddisk.jpeg?nolink|Hard Disk}}