Differences

This shows you the differences between two versions of the page.

--- userdoc:guest_vm_proxmox [2016/03/14 12:07]
abelbeck
+++ userdoc:guest_vm_proxmox [2018/09/29 10:02] (current)
mkeuter
@@ Line 1: / Line 1: @@
 ====== Proxmox VE ======
-!!Note: AstLinux 1.2.7 or later is required!!
+!!Note: AstLinux 1.2.7 or later is required (1.3.0 or later for 'VirtIO-SCSI')!!
 **VM Host Specifications:**  [[https://pve.proxmox.com/|Proxmox VE]]
 **AstLinux Board Type:**
@@ Line 18: / Line 18: @@
 **Configuration:**
+!!Note:!! These screenshots are from Proxmox version 4.1 (the WebGUI on newer versions looks slightly different!)
 Using an HTTPS web browser login into the Proxmox WebGUI, typically using port ''8006'', then upload the AstLinux Install ISO to your local storage...
 On the left select your local storage, in the right section select "Content" then "Upload", select "ISO image" then select the AstLinux Install ISO and upload it to your Proxmox server. It should then appear in the "Content" section under "ISO image".
-{{:userdoc:proxmox-upload-iso.jpeg?nolink|ISO}}
+{{:userdoc:proxmox-upload-iso.jpeg?nolink|ISO Image}}
 Now select your Proxmox node on the left, then "Create VM" on the upper right...
@@ Line 38: / Line 40: @@
 {{:userdoc:guest_vm_proxmox-create-vm-cd-dvd.jpeg?nolink|CD/DVD}}
 "Next" change the Bus/Device: to SATA and set the Disk size to 4 or 8 GB:
+!!Tip ->!! Since AstLinux 1.3.0 'SCSI' should be used as Bus and 'VirtIO SCSI' as SCSI Controller (Proxmox default!)
 {{:userdoc:guest_vm_proxmox-create-vm-harddisk.jpeg?nolink|Hard Disk}}
 "Next" change the CPU Cores: to 2:
+!!Tip ->!! To pass AES-NI support to the guest VM, select Type: [ host ] instead of the default.  Though you may see ''kvm'' "unhandled rdmsr" messages on your Proxmox VE host's console, which can be safely ignored.
 {{:userdoc:guest_vm_proxmox-create-vm-cpu.jpeg?nolink|CPU}}
@@ Line 62: / Line 68: @@
 Click "Finish", then the result should look like this:
-{{:userdoc:proxmox-astlinux-settings.jpeg?nolink|VM Settings}}
+{{:userdoc:proxmox-astlinux-settings.jpeg?nolink|VM Hardware}}
-Now select your new VM on the left side, and click "Console" on the right...
+Now select your new VM on the left side, and click "Console" on the very right side...
 {{:userdoc:guest_vm_proxmox-install-console.jpeg?nolink|Console}}