userdoc:fonebridge

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
userdoc:fonebridge [2012/07/16 14:24]
droemel 		userdoc:fonebridge [2019/07/18 17:20] (current)
mkeuter
Line 1: Line 1:
-====== Redfone foneBRIDGE ======+====== Redfone foneBRIDGE2 ======
  
-For !!AstLinux 1.0.4+!! there is a [[http://build.astlinux.org/|custom build]] option to provide experimental support for the [[http://red-fone.com/products-new/67.html|Redfone foneBRIDGE]] PRI-to-Ethernet bridges in AstLinux.+!!Note:!! This page is outdated!
  
-The standard installation + configuration procedures are described at the Redfone [[http://support.red-fone.com/index.php|support page]].+For !!AstLinux 1.0.4+!! there is a custom build option to provide __experimental__ support for the [[http://red-fone.com/fonebridge2.html|Redfone foneBRIDGE2]] PRI-to-Ethernet bridges in AstLinux.
  
-Redfone suggests to setup an own dedicated LAN between the fonebridge and your Astlinux box, where the TDM-over-Ethernet traffic runs.+The standard installation + configuration procedures are described at the Redfone [[http://red-fone.com/suport.html|support page]]((links to ''red-fone.com'' seem to be broken)). 
 + 
 +Update (2017-10-26): I found a new download page for the tools on [[https://github.com/Redfone/fonebridge2|Github]] 
 + 
 +Redfone suggests to setup an own dedicated LAN between the fonebridge and your AstLinux box, where the TDM-over-Ethernet traffic runs.
  
 In AstLinux you don't need to install anything, you just need to to create a correct ''redfone.conf'' and put it into ''/mnt/kd/'' (as usual in AstLinux), and also setup ''/mnt/kd/dahdi/system.conf'' to reflect that.  In AstLinux you don't need to install anything, you just need to to create a correct ''redfone.conf'' and put it into ''/mnt/kd/'' (as usual in AstLinux), and also setup ''/mnt/kd/dahdi/system.conf'' to reflect that. 
Line 12: Line 16:
 The needed drivers are included by default in **[[userdoc:dahdi|DAHDI]]**. You just need to to set: The needed drivers are included by default in **[[userdoc:dahdi|DAHDI]]**. You just need to to set:
   DAHDIMODS="dahdi_dynamic dahdi_dynamic_ethmf"     DAHDIMODS="dahdi_dynamic dahdi_dynamic_ethmf"  
-The Redfone tools ''fonulator'' and ''fb_flash_util'' are also included within AstLinux. +The Redfone tools ''fonulator'' and ''fb_flash_util'' are also included within AstLinux (custom build). 
  
 Normally you would store the configuration permanent into the foneBRIDGE with the ''fonulator'' utility (''--write-config''). If you want to configure your foneBRIDGE(s) on every boot, you can set the  Normally you would store the configuration permanent into the foneBRIDGE with the ''fonulator'' utility (''--write-config''). If you want to configure your foneBRIDGE(s) on every boot, you can set the 
Line 18: Line 22:
 option in your ''user.conf''. option in your ''user.conf''.
  
 +\\ 
 +\\ 
 +\\ 
  • userdoc/fonebridge.1342466671.txt.gz
  • Last modified: 2012/07/16 14:24
  • by droemel