Qotom Q10922H6 Intel N100 Fanless Appliance

Note: AstLinux 1.5.10 or later is required

Board Specifications: Mini PC Q10900H6 S13 Series

AstLinux Board Type:

• “genx86_64” (Video Console: HDMI)
• “genx86_64-serial” (Serial Console: 115200 baud)

Complete System Recommended Options:

• Memory: 262-Pin DDR5 (1.1V) 1Rx16 SO-DIMM 8GB (PC5-44800)
• Storage: M.2 NVMe Type 2280 SSD (Silicon Power 128GB SP128GBP34A60M28 or similar)

Total System Power (no HDMI connection): 15 Watts when idle.

Performance: 7.5 secs. (Single-core test, lower is better)

time ( echo "scale=3456; 4*a(1)" | bc -l )

Configuration:

/mnt/kd/rc.conf.d/user.conf

SENSEMODS="coretemp"

ALERT_SOUNDS="startup shutdown"  # Optional Sounds
ALERT_SOUNDS_OCTAVE="1"

/mnt/kd/sensors.conf

# libsensors configuration file
# -----------------------------
# Qotom Q10922H6

# coretemp CPU sensor

BIOS Setup for Restore From AC Power Loss:

On startup (quickly) press the <ESC> key to enter the BIOS Setup, go to the “O.E.M.” menu…“ . Make the following changes…

• Restore AC Power Loss → Power On

(Optional) BIOS Setup for Console Redirection:

If you are using a serial console, you may want to optionally enable Console Redirection for the BIOS configuration.

Go to the “Advanced” → “Serial Port Console Redirection” menu…

• COM0
• Console Redirection → Enabled
• Console Redirection Settings
  • Terminal Type → VT100

• Windows … (EMS)
• Console Redirection → Disabled

Save the above BIOS changes, reboot.

Tip -> If you need to choose the boot drive, for example when booting the ISO Installer via a USB drive, on startup (quickly) press the F11 key.

Default Network Port mapping:

Port Labels
1 (10G):  eth5
2 (10G):  eth4
3 (2.5G): eth1
4 (2.5G): eth0
5 (2.5G): eth2
6 (2.5G): eth3