Differences

This shows you the differences between two versions of the page.

--- userdoc:board_jetway_nf99fl-525 [2012/06/28 18:23] – abelbeck
+++ userdoc:board_jetway_nf99fl-525 [2019/07/25 03:41] (current) – abelbeck
@@ Line 2: / Line 2: @@
 !!Note: Requires AstLinux 1.x!!
+**Board Specifications:**  [[http://www.jetwaycomputer.com/spec/NF99FL-525.pdf|NF99FL-525]]
 **AstLinux Board Type:**
-  * "geni586" (VGA video console)
+  * "genx86_64" (Video Console: VGA)
-  * "geni586-serial" (19200 baud serial console)
+  * "genx86_64-serial" (Serial Console: ''19200'' baud for AstLinux 1.2.10 and earlier, ''115200'' baud for AstLinux 1.3.0 and later)
 **Complete System Recommended Options:**
-  * Daughterboard: 3x 10/100/1000 Intel LAN Module
+  * Daughterboard: Optional, (2x Intel PCI-e NIC's included on motherboard)
-  * Memory: 240-pin DDR2 667/800 DIMM 2GB (or 2x 1GB sticks)
+  * Memory: 204-pin DDR3 1333 SO-DIMM 2GB (or 2x 1GB sticks)
-  * Flash Drive: Emphase Industrial S1 SATA (or 44-pin IDE) Flash Module 2 GB
+  * Flash Drive: Emphase Industrial S1 SATA Flash Module 2 GB
   * Case:
       * __No PCI Expansion Card Support__
           * M350 Universal Mini-ITX Case
           * AC Adapter (brick): AC Power Adapter 60W, 12V, 5A
+          * DC-DC Power Converter (20-pin ATX Power): PicoPSU-80, 80 W, 12 V
           * Fan (optional): 40x40x10mm or 40x40x20mm (Noise < 25 dBA)
       * __With PCI Expansion Card Support__
-          * Jetway Case JC-11x-B Series (or similar)
+          * G-Alantic GA620-B Mini-ITX Case (or similar)
-          * AC Adapter (brick) is included, Internal ATX Power Supply not used
+          * AC Adapter (brick), Internal ATX Power Supply
-          * 2 Fans are included, CF-Reader (USB) included (optional)
+          * 2 Fans are included
-          * Riser card for 2 PCI slots is included
+          * Riser card for 2 PCI slots is required
+**Total System Power (no PCI Expansion Card):**  21 Watts when idle.
+**Performance:**  ~50 secs. (Single-core test, lower is better)
+  time ( echo "scale=3456; 4*a(1)" | bc -l )
 **Configuration:**
@@ Line 38: / Line 47: @@
   # libsensors configuration file
   # -----------------------------
-  # Jetway NF96FL-525/NF99FL-525 Dual Core Atom
+  # Jetway NF99FL-525 Dual Core Atom
-  chip "f71808e-*" "f71808a-*" "f71862fg-*" "f71869-*" "f71869a-*" "f71882fg-*" \
+  chip "f71882fg-*" "f71869a-*"
-       "f71889fg-*" "f71889ed-*" "f71889a-*"
-  ignore in1
   ignore in2
   ignore in3
-  ignore in4
-  ignore in5
-  ignore in6
   # Comment-out installed fan(s)
@@ Line 55: / Line 59: @@
   ignore fan3
-  label in0 "+3.3V"
+  label in0 "3.3V"
+  label in1 "VCORE"
+  label in4 "VDIMM"
+  label in5 "5V"
+  label in6 "12V"
   label in7 "3VSB"
   label in8 "Vbat"
@@ Line 67: / Line 75: @@
   label temp3 "SYS Temp2"
-  compute in0  @*2, @/2
+  compute in0 @*2, @/2
-  compute in7  @*2, @/2
+  compute in4 @*(1.5), @/(1.5)
-  compute in8  @*2, @/2
+  compute in5 @*(3.7), @/(3.7)
+  compute in6 @*(11), @/(11)
+  compute in7 @*2, @/2
+  compute in8 @*2, @/2
 \\
@@ Line 86: / Line 97: @@
 {{:userdoc:jetway_nf99fl-525-back.jpg?nolink|Back}}