Differences

This shows you the differences between two versions of the page.

--- userdoc:board_jetway_nf96fl-525 [2012/10/22 21:10]
abelbeck
+++ userdoc:board_jetway_nf96fl-525 [2020/04/26 17:47] (current)
abelbeck
@@ Line 9: / Line 9: @@
 **AstLinux Board Type:**
-  * "geni586" (VGA video console)
+  * "genx86_64" (Video Console: VGA)
-  * "geni586-serial" (19200 baud serial console)
+  * "genx86_64-serial" (Serial Console: ''19200'' baud for AstLinux 1.2.10 and earlier, ''115200'' baud for AstLinux 1.3.0 and later)
 **Complete System Recommended Options:**
@@ Line 23: / Line 23: @@
           * Fan (optional): 40x40x10mm or 40x40x20mm (Noise < 25 dBA)
       * __With PCI Expansion Card Support__
-          * Jetway Case JC-11x-B Series (or similar)
+          * Jetway Case JC-11x-B Series((a **PCI**-riser-card is included with the JC-11x-B case)) (or similar)
           * AC Adapter (brick) is included, Internal ATX Power Supply not used
           * 2 Fans are included, CF-Reader (USB) included (optional)
@@ Line 29: / Line 29: @@
 **Total System Power (no PCI Expansion Card):**  23 Watts when idle.
+**Performance:**  48.6 secs. (Single-core test, lower is better)
+  time ( echo "scale=3456; 4*a(1)" | bc -l )
 **Configuration:**
@@ Line 46: / Line 50: @@
   # libsensors configuration file
   # -----------------------------
-  # Jetway NF96FL-525/NF99FL-525 Dual Core Atom
+  # Jetway NF96FL-525 / NF96U-525 Dual Core Atom
-  chip "f71808e-*" "f71808a-*" "f71862fg-*" "f71869-*" "f71869a-*" "f71882fg-*" \
+  chip "f71882fg-*" "f71869-*" "f71869a-*"
-       "f71889fg-*" "f71889ed-*" "f71889a-*"
-  ignore in1
   ignore in2
   ignore in3
-  ignore in4
-  ignore in5
-  ignore in6
   # Comment-out installed fan(s)
@@ Line 63: / Line 62: @@
   ignore fan3
-  label in0 "+3.3V"
+  label in0 "3.3V"
+  label in1 "VCORE"
+  label in4 "VDIMM"
+  label in5 "5V"
+  label in6 "12V"
   label in7 "3VSB"
   label in8 "Vbat"
@@ Line 75: / Line 78: @@
   label temp3 "SYS Temp2"
-  compute in0  @*2, @/2
+  compute in0 @*2, @/2
-  compute in7  @*2, @/2
+  compute in4 @*(1.5), @/(1.5)
-  compute in8  @*2, @/2
+  compute in5 @*(3.7), @/(3.7)
+  compute in6 @*(11), @/(11)
+  compute in7 @*2, @/2
+  compute in8 @*2, @/2
 \\
@@ Line 87: / Line 93: @@
 For louder/faster 40x40x20mm fans, values of 095(Full),065(Idle),025(%) slows the fan for normal operation and reduces the noise.
+\\
+!!Note:!! In AstLinux 1.2.5 we occasionally found issues with Kernel Oops during reboots, when using the new faster 'kernel-reboot' feature. We never saw these issues when using the standard full reboot.
+To be safe the best is to enable 'Prefs/System & Staff Tab Options/Disable faster "kernel-reboot" System Reboot' and always use the full reboot.
+{{:userdoc:disable-kernel-reboot.png?nolink|Disable kernel-reboot}}
+\\
 **Photos:**
@@ Line 92: / Line 105: @@
 {{:userdoc:jetway_nf96fl-525-view2.jpg?nolink|View 2}}