userdoc:board_jetway_jbc430u941

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
userdoc:board_jetway_jbc430u941 [2019/11/18 15:55]
abelbeck 		userdoc:board_jetway_jbc430u941 [2022/05/07 10:13]
abelbeck
Line 17: Line 17:
 **Total System Power (no HDMI connection):**  6.5 Watts when idle. **Total System Power (no HDMI connection):**  6.5 Watts when idle.
  
-**Performance:**  34.9 secs. (Single-core test, lower is better) +**Performance:**  24.9 secs. (Single-core test, lower is better) 
  
   time ( echo "scale=3456; 4*a(1)" | bc -l )   time ( echo "scale=3456; 4*a(1)" | bc -l )
Line 50: Line 50:
  
 \\ \\
-**BIOS Setup for Boot Option Filter (non-UEFI):**+**BIOS Setup for Boot OS Selection (non-UEFI):**
  
-While in the BIOS Setup as above, check to make sure Legacy only boot is enabled, go to the "Advanced" -> "CSM Configuration" menu...+While in the BIOS Setup as above, to enable Legacy boot, go to the "Advanced" -> "CSM Configuration" menu...
  
   * ''Boot Option Filter -> Legacy Only''   * ''Boot Option Filter -> Legacy Only''
 +
 +\\
 +**BIOS Setup for Boot OS Selection (UEFI):**
 +
 +!!UEFI Boot requires AstLinux 1.4.6 or later!! - additionally RUNNIX 0.6.10 or later is needed.
 +
 +While in the BIOS Setup as above, to enable UEFI boot, go to the "Advanced" -> "CSM configuration" menu...
 +
 +  * ''Boot option filter -> UEFI only''
  
 \\ \\
  • userdoc/board_jetway_jbc430u941.txt
  • Last modified: 2022/05/20 17:10
  • by abelbeck