userdoc:board_hsipc_n4120 [AstLinux Documentation]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== HSIPC HS-N4120 Fanless Appliance ======

!!Note: AstLinux 1.3.0 or later is required!!

/* **Board Specifications:**  [[https://doc.astlinux-project.org/_media/userdoc:qotom-q530g6-motherboard-info.pdf|Q3855UG6-P Motherboard]] */

**AstLinux Board Type:**

  * "genx86_64" (Video Console: HDMI)
  * “genx86_64-serial” (Serial Console: 115200 baud)

**Complete System Recommended Options:**

  * Memory: 260-pin DDR4 (1.2V) 2133 SO-DIMM 4GB (PC4-17000) (2 slots, max. 16 GB)
  * Storage: mSATA SSD or 2.5" SATA SSD

**Total System Power (no HDMI connection):**  6 Watts when idle.

**Performance:**  12.4 secs. (Single-core test, lower is better) 

  time ( echo "scale=3456; 4*a(1)" | bc -l )

**Configuration:**


''/mnt/kd/rc.conf.d/user.conf''

  SENSEMODS="coretemp"
  
  ALERT_SOUNDS="startup shutdown"  # Optional Sounds
  

\\
''/mnt/kd/sensors.conf''

  # libsensors configuration file
  # -----------------------------
  # HSIPC N4120
  
  # coretemp CPU sensor

===== BIOS =====

  * DEL - BIOS
  * F11 - Bootmenü

\\
/*
===== BIOS Settings =====

**BIOS Setup for Restore AC Power Loss:**

The Energy-Related Products Directive (ERP) is the European Commission Directive required for products sold and exported to the EU.  As such the Qotom Q530G6 does not automatically power on after a power failure.  Obviously this //feature// needs to be disabled.

On startup (quickly) press the ''<ESC>'' key to enter the BIOS Setup, go to the "Chipset" -> "PCH-IO Configuration" .  Make the following changes...

  * ''Restore From AC Power Loss -> Power On''

The results should like the following screen...

{{:userdoc:qotom-q530g6-bios-power-on.png?nolink|BIOS Power On}}

\\
**BIOS Setup for Boot Option Filter (non-UEFI):**

While in the BIOS Setup as above, check to make sure Legacy only boot is enabled, go to the "Advanced" -> "CSM Configuration" menu...

  * ''Boot option filter -> Legacy only''

The results should like the following screen...

{{:userdoc:qotom-q530g6-bios-legacy-boot.png?nolink|BIOS Legacy Boot}}

\\
**(Optional) BIOS Setup for Console Redirection:**

If you are using a serial console, you may want to optionally enable Console Redirection for the BIOS configuration.

First, you must enable hidden menus, go to the "Advanced" -> "OEM FORM" menu...

  * ''Hide setup item -> Disabled''

Now many more options are available, go to the "Advanced" -> "Serial Port Console Redirection" menu...

  * ''COM0''
  * ''Console Redirection -> Enabled''
  * ''Console Redirection Settings''
    * ''Terminal Type -> VT100''

  * ''Legacy Console Redirection Settings''
    * ''Redirect After POST -> BootLoader''

  * ''Windows ... (EMS)''
  * ''Console Redirection -> Disabled''

\\
Save the above BIOS changes, reboot.

!!Tip ->!! If you need to choose the boot drive, for example when booting the ISO Installer via a USB drive, on startup (quickly) press the ''F11'' key.
*/
===== Photos =====

{{:userdoc:hsipc-n4120-back.jpg?nolink|Network}}

{{:userdoc:hsipc-n4120-front.jpg?nolink|Front}}

{{:userdoc:hsipc-n4120-inside.jpg?nolink|Inside}}

\\