Both sides previous revision Previous revision Next revision | Previous revision |
userdoc:board_hpe_microserver_x3421 [2019/06/03 20:11] – abelbeck | userdoc:board_hpe_microserver_x3421 [2019/07/25 02:12] (current) – abelbeck |
---|
**Total System Power:** 16 Watts when idle. | **Total System Power:** 16 Watts when idle. |
| |
**Performance:** 25.7 secs. (Single-core test, lower is better) | **Performance:** 28.0 secs. (Single-core test, lower is better) |
| |
openvpn --genkey --secret /tmp/secret | time ( echo "scale=3456; 4*a(1)" | bc -l ) |
time openvpn --test-crypto --secret /tmp/secret --verb 0 --tun-mtu 20000 --cipher aes-256-cbc | |
| |
**Configuration:** | **Configuration:** |
* ''Banner Message Timeout -> 2 Seconds'' | * ''Banner Message Timeout -> 2 Seconds'' |
| |
The results should like the following screen... | The results should look like the following screen... |
| |
{{:userdoc:hpe-microserver-x3421-bios-nic-pxe.png?nolink|BIOS NIC PXE}} | {{:userdoc:hpe-microserver-x3421-bios-nic-pxe.png?nolink|BIOS NIC PXE}} |
* ''Restore On Power Loss -> Power On'' | * ''Restore On Power Loss -> Power On'' |
| |
The results should like the following screen... | The results should look like the following screen... |
| |
{{:userdoc:hpe-microserver-x3421-bios-power-on.png?nolink|BIOS Power On}} | {{:userdoc:hpe-microserver-x3421-bios-power-on.png?nolink|BIOS Power On}} |
* ''Boot Mode -> Legacy only'' | * ''Boot Mode -> Legacy only'' |
| |
The results should like the following screen... | The results should look like the following screen... |
| |
{{:userdoc:hpe-microserver-x3421-bios-legacy-boot.png?nolink|BIOS Legacy Boot}} | {{:userdoc:hpe-microserver-x3421-bios-legacy-boot.png?nolink|BIOS Legacy Boot}} |