Differences

This shows you the differences between two versions of the page.

--- userdoc:wanpipe [2012/01/10 09:23]
droemel
+++ userdoc:wanpipe [2017/03/01 06:24] (current)
droemel
@@ Line 1: / Line 1: @@
-====== Wanpipe ======
+====== Sangoma Wanpipe ======
+!!Note:!! Since AstLinux 1.2.9 Sangoma Wanpipe card support is no longer supplied in the standard AstLinux images.\\ Use a custom build to enable 'wanpipe' support.
 Starting with AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' which configures [[http://www.sangoma.com/|Sangoma]] telephony cards for DAHDI, are supported. These utilities define files in the /mnt/kd/wanpipe (aka /etc/wanpipe) directory.
@@ Line 5: / Line 7: @@
 Previous to AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' were not supported.  The configuration files must therefore be created manually for older versions of AstLinux.
-With AstLinux 1.0.2 also the A500 and B700 BRI/Hybrid cards which now work together with DAHDI (not SMG!) are supported in AstLinux.
+With AstLinux 1.0.2 the A500 and B700 BRI/Hybrid cards, which work now with DAHDI((since wanpipe-3.5.21)), are supported too.
-"wancfg" does NOT work with the B700 card, but "wancfg_dahdi" does.
+The "wancfg" tool is only for cards used in "data mode" and does NOT work with the B700 card, "wancfg_dahdi" is needed for "voice mode" together with Asterisk.
 **Remember that AstLinux stores the majority of its configuration files in a different location to where vanilla Asterisk installations store theirs, so use the locations listed below.**
@@ Line 80: / Line 82: @@
 </code>
+\\