This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
userdoc:wanpipe [2011/02/09 11:31] abelbeck |
userdoc:wanpipe [2017/03/01 06:24] (current) droemel |
====== Wanpipe ====== | ====== Sangoma Wanpipe ====== |
| |
| !!Note:!! Since AstLinux 1.2.9 Sangoma Wanpipe card support is no longer supplied in the standard AstLinux images.\\ Use a custom build to enable 'wanpipe' support. |
| |
Starting with AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' which configures [[http://www.sangoma.com/|Sangoma]] telephony cards for DAHDI, are supported. These utilities define files in the /mnt/kd/wanpipe (aka /etc/wanpipe) directory. | Starting with AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' which configures [[http://www.sangoma.com/|Sangoma]] telephony cards for DAHDI, are supported. These utilities define files in the /mnt/kd/wanpipe (aka /etc/wanpipe) directory. |
Previous to AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' were not supported. The configuration files must therefore be created manually for older versions of AstLinux. | Previous to AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' were not supported. The configuration files must therefore be created manually for older versions of AstLinux. |
| |
**Remember that Astlinux stores the majority of its configuration files in a different location to where vanilla Asterisk installations store theirs, so use the locations listed below.** | With AstLinux 1.0.2 the A500 and B700 BRI/Hybrid cards, which work now with DAHDI((since wanpipe-3.5.21)), are supported too. |
| The "wancfg" tool is only for cards used in "data mode" and does NOT work with the B700 card, "wancfg_dahdi" is needed for "voice mode" together with Asterisk. |
| |
| **Remember that AstLinux stores the majority of its configuration files in a different location to where vanilla Asterisk installations store theirs, so use the locations listed below.** |
<code> | <code> |
/mnt/kd/wanpipe/wanpipe1.conf (aka /etc/wanpipe/wanpipe1.conf) | /mnt/kd/wanpipe/wanpipe1.conf (aka /etc/wanpipe/wanpipe1.conf) |
</code> | </code> |
| |
| \\ |