| Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
userdoc:wanpipe [2010/02/24 05:03]
tom Typo! |
userdoc:wanpipe [2017/03/01 06:24] (current)
droemel |
| ====== Wanpipe ====== | ====== Sangoma Wanpipe ====== |
| |
| Because Astlinux has been created to fit into as small an installation as possible, a full version of [[http://www.perl.org/|Perl]] is not included. This means that the [[http://www.sangoma.com/|Sangoma]] utility ''wancfg'', which configures [[http://www.sangoma.com/|Sangoma]] telephony cards, will not run. The configuration files must therefore be created manually. | !!Note:!! Since AstLinux 1.2.9 Sangoma Wanpipe card support is no longer supplied in the standard AstLinux images.\\ Use a custom build to enable 'wanpipe' support. |
| |
| **Remember that Astlinux stores the majority of its configuration files in a different location to where vanilla Asterisk installations store theirs, so use the locations listed below.** | Starting with AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' which configures [[http://www.sangoma.com/|Sangoma]] telephony cards for DAHDI, are supported. These utilities define files in the /mnt/kd/wanpipe (aka /etc/wanpipe) directory. |
| |
| Here are sample Wanpipe configuration files (for a [[http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html|Sangoma A101u]] in a [[http://www.soekris.com/net5501.htm|Soekris net5501]] connecting to a US [[http://en.wikipedia.org/wiki/T-carrier#t1|T1]]). They will need to be customized to fit your own environment. | Previous to AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' were not supported. The configuration files must therefore be created manually for older versions of AstLinux. |
| | |
| | With AstLinux 1.0.2 the A500 and B700 BRI/Hybrid cards, which work now with DAHDI((since wanpipe-3.5.21)), are supported too. |
| | The "wancfg" tool is only for cards used in "data mode" and does NOT work with the B700 card, "wancfg_dahdi" is needed for "voice mode" together with Asterisk. |
| | |
| | **Remember that AstLinux stores the majority of its configuration files in a different location to where vanilla Asterisk installations store theirs, so use the locations listed below.** |
| | <code> |
| | /mnt/kd/wanpipe/wanpipe1.conf (aka /etc/wanpipe/wanpipe1.conf) |
| | |
| | /mnt/kd/dahdi/system.conf (aka /etc/dahdi/system.conf) |
| | |
| | /mnt/kd/asterisk/chan_dahdi.conf (aka /etc/asterisk/chan_dahdi.conf) |
| | </code> |
| | |
| | Here are sample [[http://wiki.sangoma.com/wanpipe-linux-drivers|Wanpipe]] configuration files (for a [[http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html|Sangoma A101u]] in a [[http://www.soekris.com/net5501.htm|Soekris net5501]] connecting to a US [[http://en.wikipedia.org/wiki/T-carrier#t1|T1]]). They will need to be customized to fit your own environment. |
| |
| ''/mnt/kd/wanpipe/wanpipe1.conf'': | ''/mnt/kd/wanpipe/wanpipe1.conf'': |
| echocanceller=mg2,1-23 | echocanceller=mg2,1-23 |
| # channel 24 control | # channel 24 control |
| dchan=24 | hardhdlc=24 |
| </code> | </code> |
| |
| </code> | </code> |
| |
| | \\ |