This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision |
| userdoc:wanpipe [2012/01/11 21:05] – droemel | userdoc:wanpipe [2017/03/01 12:24] (current) – droemel |
|---|
| ====== Wanpipe ====== | ====== Sangoma Wanpipe ====== |
| | |
| | !!Note:!! Since AstLinux 1.2.9 Sangoma Wanpipe card support is no longer supplied in the standard AstLinux images.\\ Use a custom build to enable 'wanpipe' support. |
| |
| Starting with AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' which configures [[http://www.sangoma.com/|Sangoma]] telephony cards for DAHDI, are supported. These utilities define files in the /mnt/kd/wanpipe (aka /etc/wanpipe) directory. | Starting with AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' which configures [[http://www.sangoma.com/|Sangoma]] telephony cards for DAHDI, are supported. These utilities define files in the /mnt/kd/wanpipe (aka /etc/wanpipe) directory. |
| Previous to AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' were not supported. The configuration files must therefore be created manually for older versions of AstLinux. | Previous to AstLinux 0.7.6 the utilities ''wancfg'' and ''wancfg_dahdi'' were not supported. The configuration files must therefore be created manually for older versions of AstLinux. |
| |
| With AstLinux 1.0.2 also the A500 and B700 BRI/Hybrid cards, which works (since wanpipe-3.5.21) now with DAHDI, are now supported. | With AstLinux 1.0.2 the A500 and B700 BRI/Hybrid cards, which work now with DAHDI((since wanpipe-3.5.21)), are supported too. |
| The "wancfg" tool is only for cards used in "data mode" and does NOT work with the B700 card, "wancfg_dahdi" is needed for "voice mode" together with Asterisk. | The "wancfg" tool is only for cards used in "data mode" and does NOT work with the B700 card, "wancfg_dahdi" is needed for "voice mode" together with Asterisk. |
| |
| </code> | </code> |
| |
| | \\ |