Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_ups_monitoring [2014/01/11 23:04]
abelbeck [CLI Custom Configuration]
+++ userdoc:tt_ups_monitoring [2016/01/04 12:33]
droemel [General Configuration]
@@ Line 25: / Line 25: @@
 {{:userdoc:ups-default-config.jpg?nolink|UPS Default Configuration}}
-!!Note ->!! By default the "UPS Password" is: ''astlinux''
+!!Note ->!! By default the "UPS Password" is: ''astlinux''.
 \\
@@ Line 46: / Line 46: @@
 {{:userdoc:ups-server-config.jpg?nolink|UPS Server Configuration}}
+!!Note ->!! The firewall port on the server, if needed, is 3493/TCP
 \\
@@ Line 64: / Line 66: @@
 Finally, the "Kill Power on the UPS after a Powerfail Shutdown" only applies if a "UPS Driver" is defined.  When enabled this option will instruct the UPS to cut power if both on battery and a shutdown is in progress.  Power will be cut approximately 60 seconds after a shutdown.  The idea is when line power is restored the battery will not be totally depleted and the UPS connected device will be power cycled off/on.
 ==== Display UPS Status ====
@@ Line 100: / Line 101: @@
 !!Tip ->!! The directory ''/stat/etc/ups/'' contains the sample templates for the above files as reference.
-The ''[master]'' user's password is auto-generated as a random string, which may be accessed by the ''upsd.users'' and ''upsmon.conf'' configurations files.  For example a snippet of a custom ''upsd.users'' could contain:
+The ''[master]'' user's password is auto-generated as a random string, which may be accessed by the ''upsd.users'' and ''upsmon.conf'' configuration files using the token: ''@MASTER_PASS@'' .  For example a snippet of a custom ''upsd.users'' could contain:
   [master]