Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
userdoc:tt_serial_console_speed_tty [2012/06/04 12:27]
abelbeck
userdoc:tt_serial_console_speed_tty [2017/06/11 08:41] (current)
abelbeck
Line 1: Line 1:
 ====== Serial Console speed/tty ====== ====== Serial Console speed/tty ======
  
-The AstLinux ​board type of "​geni586-serial" assumes a serial console of 19200 baud on /dev/ttyS0 .  Described here is a method to change the serial console speed/tty, not only currently but also automatically after upgrades.+!!Note ->!! For AstLinux ​1.3.0 and later, all serial ​consoles are ''​115200 ​baud 8N1''​.
  
-This applies to the board type of "geni586-serial" ​and all other serial ​console board types, "​net5501",​ "​alix",​ etc. .+!!Note ->!! For AstLinux 1.2.10 and earlier, all serial consoles are ''​19200 baud 8N1'',​ unless otherwise noted. 
 + 
 +Described here is a method to change the serial console speed/tty, not only currently but also automatically after upgrades. 
 + 
 +This applies to the board types of ''​geni586-serial'' ​and ''​genx86_64-serial''​.
  
 !!Note: AstLinux 1.0.4 or later is required!! !!Note: AstLinux 1.0.4 or later is required!!
  
-After setting-up AstLinux and creating the persistent storage, the ''​setconsole-speed-tty''​ command is used to make changes to the serial console speed/tty settings.+After setting-up AstLinux and creating the persistent storage, the ''​setconsole-speed-tty''​ command is used to make persistent ​changes to the serial console speed/tty settings.
  
 Usage: Usage:
Line 13: Line 17:
   Usage: setconsole-speed-tty [ show|reset|help ] 9600|19200|38400|57600|115200 [ ttySn ]   Usage: setconsole-speed-tty [ show|reset|help ] 9600|19200|38400|57600|115200 [ ttySn ]
  
-+\
-Set console speed to 38400 baudusing default ttyS0+To issue this command you must either SSH into the AstLinux boxor use the CLI tab in the web interface with the "CLI Proxy Server"​ enabled in the Network tab.  Some example command arguments are:
  
-  ​setconsole-speed-tty ​38400+Set console speed to 19200 baud, using default ttyS0 
 + 
 +  ​setconsole-speed-tty ​19200
  
 Set console speed to 115200 baud, using /dev/ttyS1 Set console speed to 115200 baud, using /dev/ttyS1
Line 29: Line 35:
   setconsole-speed-tty reset   setconsole-speed-tty reset
  
 +\\