Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Serial Console speed/tty ====== The AstLinux board type of "geni586-serial" assumes a serial console of 19200 baud on /dev/ttyS0 . Described here is a method to change the serial console speed/tty, not only currently but also automatically after upgrades. This applies to the board type of "geni586-serial" and all other serial console board types, "net5501", "alix", etc. . !!Note: AstLinux 1.0.4 or later is required!! After setting-up AstLinux and creating the persistent storage, the ''setconsole-speed-tty'' command is used to make changes to the serial console speed/tty settings. Usage: setconsole-speed-tty [ show|reset|help ] 9600|19200|38400|57600|115200 [ ttySn ] Set console speed to 38400 baud, using default ttyS0 setconsole-speed-tty 38400 Set console speed to 115200 baud, using /dev/ttyS1 setconsole-speed-tty 115200 ttyS1 Display current settings setconsole-speed-tty show Reset /etc/inittab to default factory state with matching kernel console= values setconsole-speed-tty reset userdoc/tt_serial_console_speed_tty.1338830736.txt.gz Last modified: 2012/06/04 12:25by abelbeck