Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_serial_console_speed_tty [2017/06/11 13:38] – abelbeck
+++ userdoc:tt_serial_console_speed_tty [2017/06/11 13:41] (current) – abelbeck
@@ Line 20: / Line 20: @@
 To issue this command you must either SSH into the AstLinux box, or use the CLI tab in the web interface with the "CLI Proxy Server" enabled in the Network tab.  Some example command arguments are:
-Set console speed to 38400 baud, using default ttyS0
+Set console speed to 19200 baud, using default ttyS0
-  setconsole-speed-tty 38400
+  setconsole-speed-tty 19200
 Set console speed to 115200 baud, using /dev/ttyS1
@@ Line 36: / Line 36: @@
 \\
-While this ''setconsole-speed-tty'' command is mostly intended for the board type of "geni586-serial" so as to support additional hardware without requiring new board types, this command may also be useful for other board types.  For example, suppose you have both Soekris net5501 (19200 baud default) and PC Engines alix (38400 baud default) hardware and want a common terminal to act as a console.  The net5501 can have it's default console speed easily changed via it's BIOS to 38400 baud, and then issue ''setconsole-speed-tty 38400'' on the net5501.  Now both the net5501 and alix boxes will use serial consoles at 38400 baud.