Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision | ||
userdoc:tt_serial_console_speed_tty [2012/06/04 12:14] abelbeck created |
userdoc:tt_serial_console_speed_tty [2017/06/11 08:41] (current) abelbeck |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== Serial Console speed/tty ====== | ====== Serial Console speed/tty ====== | ||
- | The AstLinux | + | !!Note ->!! For AstLinux |
- | This applies to the board type of "geni586-serial" | + | !!Note ->!! For AstLinux 1.2.10 and earlier, all serial consoles are '' |
+ | |||
+ | Described here is a method to change the serial console speed/tty, not only currently but also automatically after upgrades. | ||
+ | |||
+ | This applies to the board types of '' | ||
!!Note: AstLinux 1.0.4 or later is required!! | !!Note: AstLinux 1.0.4 or later is required!! | ||
+ | |||
+ | After setting-up AstLinux and creating the persistent storage, the '' | ||
+ | |||
+ | Usage: | ||
+ | |||
+ | Usage: setconsole-speed-tty [ show|reset|help ] 9600|19200|38400|57600|115200 [ ttySn ] | ||
+ | |||
+ | \\ | ||
+ | To issue this command you must either SSH into the AstLinux box, or use the CLI tab in the web interface with the "CLI Proxy Server" | ||
+ | |||
+ | Set console speed to 19200 baud, using default ttyS0 | ||
+ | |||
+ | setconsole-speed-tty 19200 | ||
+ | |||
+ | Set console speed to 115200 baud, using /dev/ttyS1 | ||
+ | |||
+ | setconsole-speed-tty 115200 ttyS1 | ||
+ | |||
+ | Display current settings | ||
+ | |||
+ | setconsole-speed-tty show | ||
+ | |||
+ | Reset / | ||
+ | setconsole-speed-tty reset | ||
+ | |||
+ | \\ | ||