Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_runnix [2011/11/30 00:05] – abelbeck
+++ userdoc:tt_runnix [2022/05/31 13:34] (current) – [RUNNIX] abelbeck
@@ Line 3: / Line 3: @@
 It is very important to understand that while AstLinux 0.7.x uses the runnix-0.3 (or runnix-0.2.1) bootloader, AstLinux 1.0.x requires the runnix-0.4 bootloader. This change is required since the Linux Kernel differences require different squashfs image formats.
-The AstLinux **[[system-config#unionfs|bootloader]]** RUNNIX has been updated to runnix-0.3.2 ((previously runnix-0.2.1)). This is considered an 'optional' upgrade at this time, and AstLinux 0.7.5 does not require runnix-0.3.2.\\
+The Web Interface may be used to upgrade RUNNIX via the System Tab.  Or, using the Command Line Interface:
-If you currently have problems booting with a SATA drive, or just want the latest features, after you upgrade to 0.7.5, and with internet connectivity, you may upgrade RUNNIX from the CLI by typing:
   $ upgrade-RUNNIX-image check     (if the response looks good, then type)
@@ Line 13: / Line 12: @@
 <code>
-      ##################################
+      #########################################
-      #  RUNNIX - AstLinux bootloader  #
+      #  RUNNIX - AstLinux x86_64 bootloader  #
-      ##################################
+      #########################################
        runnix)  RUNNIX boot (default)
@@ Line 25: / Line 24: @@
       xrunnix)  Use previous RUNNIX image (if any)
-      memtest)  Run Memtest86+ v4.10
+      memtest)  Run Memtest86+
 </code>
 ==== Tips ====