userdoc:tt_runnix

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
userdoc:tt_runnix [2011/11/29 18:05]
abelbeck
userdoc:tt_runnix [2011/11/29 18:07]
abelbeck
Line 3: Line 3:
 It is very important to understand that while AstLinux 0.7.x uses the runnix-0.3 (or runnix-0.2.1) bootloader, AstLinux 1.0.x requires the runnix-0.4 bootloader. This change is required since the Linux Kernel differences require different squashfs image formats. It is very important to understand that while AstLinux 0.7.x uses the runnix-0.3 (or runnix-0.2.1) bootloader, AstLinux 1.0.x requires the runnix-0.4 bootloader. This change is required since the Linux Kernel differences require different squashfs image formats.
  
-The AstLinux **[[system-config#unionfs|bootloader]]** RUNNIX has been updated to runnix-0.3.2 ((previously runnix-0.2.1)). This is considered an 'optional' upgrade at this time, and AstLinux 0.7.5 does not require runnix-0.3.2.\\  +The Web Interface may be used to upgrade RUNNIX via the System Tab Orusing the Command Line Interface:
-If you currently have problems booting with a SATA drive, or just want the latest features, after you upgrade to 0.7.5and with internet connectivity, you may upgrade RUNNIX from the CLI by typing:+
  
   $ upgrade-RUNNIX-image check     (if the response looks good, then type)   $ upgrade-RUNNIX-image check     (if the response looks good, then type)
  • userdoc/tt_runnix.txt
  • Last modified: 2022/05/31 08:34
  • by abelbeck