Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_runnix [2011/09/11 05:13]
droemel
+++ userdoc:tt_runnix [2014/01/26 04:47]
abelbeck [RUNNIX]
@@ Line 1: / Line 1: @@
 ====== RUNNIX ======
-The AstLinux **[[system-config#unionfs|bootloader]]** RUNNIX has been updated to runnix-0.3.2 ((previously runnix-0.2.1)). This is considered an 'optional' upgrade at this time, and AstLinux 0.7.5 does not require runnix-0.3.2.\\
+It is very important to understand that while AstLinux 0.7.x uses the runnix-0.3 (or runnix-0.2.1) bootloader, AstLinux 1.0.x requires the runnix-0.4 bootloader. This change is required since the Linux Kernel differences require different squashfs image formats.
-If you currently have problems booting with a SATA drive, or just want the latest features, after you upgrade to 0.7.5, and with internet connectivity, you may upgrade RUNNIX from the CLI by typing:
+The Web Interface may be used to upgrade RUNNIX via the System Tab.  Or, using the Command Line Interface:
   $ upgrade-RUNNIX-image check     (if the response looks good, then type)
@@ Line 23: / Line 24: @@
       xrunnix)  Use previous RUNNIX image (if any)
-      memtest)  Run Memtest86+ v4.10
+      memtest)  Run Memtest86+
 </code>
 ==== Tips ====
-  * You'll find the stuff that's normally in ''/oldroot/cdrom/'' now in /mnt/base/''!
   * You can hit '''SPACE''' at the ''boot:'' prompt and it will wait without registering any keystrokes.  (ie, ''boot:'' prompt appears, hit '''SPACE''', play with the box, come back and type '''ssh RETURN'''.)
   * You __cannot stop__ a normal '''ping''' command at the console, because the '''ctrl-c''' to stop it, won't work in this case ('''ping -c4 <IP>''' and ping over ssh will work fine).
@@ Line 38: / Line 38: @@
     * ssh port = 2222.
   * To reboot from the console you need to type '''exit''' or '''reboot -f'''. In ssh '''reboot -f''' also works.
+  * You'll find the stuff that's normally in ''/oldroot/cdrom/'' now in ''/mnt/base/''
 \\