userdoc:tt_runnix

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
userdoc:tt_runnix [2011/09/11 05:13]
droemel 		userdoc:tt_runnix [2011/11/29 18:05]
abelbeck
Line 1: Line 1:
 ====== RUNNIX ====== ====== RUNNIX ======
 +
 +It is very important to understand that while AstLinux 0.7.x uses the runnix-0.3 (or runnix-0.2.1) bootloader, AstLinux 1.0.x requires the runnix-0.4 bootloader. This change is required since the Linux Kernel differences require different squashfs image formats.
  
 The AstLinux **[[system-config#unionfs|bootloader]]** RUNNIX has been updated to runnix-0.3.2 ((previously runnix-0.2.1)). This is considered an 'optional' upgrade at this time, and AstLinux 0.7.5 does not require runnix-0.3.2.\\  The AstLinux **[[system-config#unionfs|bootloader]]** RUNNIX has been updated to runnix-0.3.2 ((previously runnix-0.2.1)). This is considered an 'optional' upgrade at this time, and AstLinux 0.7.5 does not require runnix-0.3.2.\\ 
Line 27: Line 29:
 ==== Tips ==== ==== Tips ====
  
-  * You'll find the stuff that's normally in ''/oldroot/cdrom/'' now in /mnt/base/''! 
   * You can hit '''SPACE''' at the ''boot:'' prompt and it will wait without registering any keystrokes.  (ie, ''boot:'' prompt appears, hit '''SPACE''', play with the box, come back and type '''ssh RETURN'''.)   * You can hit '''SPACE''' at the ''boot:'' prompt and it will wait without registering any keystrokes.  (ie, ''boot:'' prompt appears, hit '''SPACE''', play with the box, come back and type '''ssh RETURN'''.)
   * You __cannot stop__ a normal '''ping''' command at the console, because the '''ctrl-c''' to stop it, won't work in this case ('''ping -c4 <IP>''' and ping over ssh will work fine).   * You __cannot stop__ a normal '''ping''' command at the console, because the '''ctrl-c''' to stop it, won't work in this case ('''ping -c4 <IP>''' and ping over ssh will work fine).
Line 38: Line 39:
     * ssh port = 2222.     * ssh port = 2222.
   * To reboot from the console you need to type '''exit''' or '''reboot -f'''. In ssh '''reboot -f''' also works.   * To reboot from the console you need to type '''exit''' or '''reboot -f'''. In ssh '''reboot -f''' also works.
 +  * You'll find the stuff that's normally in ''/oldroot/cdrom/'' now in ''/mnt/base/''
  
 \\  \\ 
  
  • userdoc/tt_runnix.txt
  • Last modified: 2022/05/31 08:34
  • by abelbeck