Both sides previous revision
Previous revision
Next revision
|
Previous revision
Next revision
Both sides next revision
|
userdoc:tt_runnix [2010/12/19 16:38] droemel |
userdoc:tt_runnix [2011/09/11 05:14] droemel |
====== RUNNIX ====== | ====== RUNNIX ====== |
| |
The AstLinux **[[system-config#unionfs|bootloader]]** RUNNIX has been updated to runnix-0.3.1 ((previously runnix-0.2.1)). This is considered an 'optional' upgrade at this time, and AstLinux 0.7.5 does not require runnix-0.3.1.\\ | The AstLinux **[[system-config#unionfs|bootloader]]** RUNNIX has been updated to runnix-0.3.2 ((previously runnix-0.2.1)). This is considered an 'optional' upgrade at this time, and AstLinux 0.7.5 does not require runnix-0.3.2.\\ |
If you currently have problems booting with a SATA drive, or just want the latest features, after you upgrade to 0.7.5, and with internet connectivity, you may upgrade RUNNIX from the CLI by typing: | If you currently have problems booting with a SATA drive, or just want the latest features, after you upgrade to 0.7.5, and with internet connectivity, you may upgrade RUNNIX from the CLI by typing: |
| |
| |
* You can hit '''SPACE''' at the ''boot:'' prompt and it will wait without registering any keystrokes. (ie, ''boot:'' prompt appears, hit '''SPACE''', play with the box, come back and type '''ssh RETURN'''.) | * You can hit '''SPACE''' at the ''boot:'' prompt and it will wait without registering any keystrokes. (ie, ''boot:'' prompt appears, hit '''SPACE''', play with the box, come back and type '''ssh RETURN'''.) |
* You __cannot stop__ a normal '''ping''' command at the console, because the '''ctrl-c''' to stop it, won't work in this case ('''ping -c4 ...''' and ping over ssh will work fine). | * You __cannot stop__ a normal '''ping''' command at the console, because the '''ctrl-c''' to stop it, won't work in this case ('''ping -c4 <IP>''' and ping over ssh will work fine). |
* You can use disk repair commands like '''dosfsck''' or '''e2fsck''' in RUNNIX (use '''fdisk -l''' before to show the partitions/volumes). | * You can use disk repair commands like '''dosfsck''' or '''e2fsck''' in RUNNIX (use '''fdisk -l''' before to show the partitions/volumes). |
* For __non-serial__ consoles (i586/VIA) you can now use an alternate **[[userdoc:tt_console-kmap|keyboard mapping]]**. | * For __non-serial__ consoles (i586/VIA) you can now use an alternate **[[userdoc:tt_console-kmap|keyboard mapping]]**. |
* For ssh to work, you may need to edit the network settings in '''/oldroot/cdrom/os/default.conf''' accordingly (''SSHPORT="2222"'' is a new variable since 0.3.0 and will not exist, when you upgrade, if not found 2222 is the default ssh port and '''eth0''' the default NIC). | * For ssh to work, you may need to edit the network settings in '''/oldroot/cdrom/os/default.conf''' accordingly (''SSHPORT="2222"'' is a new variable since 0.3.0 and will not exist, when you upgrade) |
| * By default (if not defined) the network variables are: |
| * NIC = eth0 |
| * IP = DHCP |
| * ssh port = 2222. |
* To reboot from the console you need to type '''exit''' or '''reboot -f'''. In ssh '''reboot -f''' also works. | * To reboot from the console you need to type '''exit''' or '''reboot -f'''. In ssh '''reboot -f''' also works. |
| * You'll find the stuff that's normally in ''/oldroot/cdrom/'' now in /mnt/base/'' |
| |
\\ | \\ |
| |