Network Configuration

In some installations, Astlinux will not be your LAN's gateway, and Astlinux itself might have to use that gateway to reach a particular subnet (common in VPN situations). To configure this, edit /mnt/kd/rc.elocal (or create it if not yet present), and add the following to it:

ip route add to xxx.xxx.xxx.xxx/xx via yyy.yyy.yyy.yyy dev ethz

• xxx.xxx.xxx.xxx/xx is the remote subnet which can be reached via the gateway
• yyy.yyy.yyy.yyy is the IP address of the gateway
• ethz is the NIC attached to the same subnet as the gateway

rc.elocal is simply a start-up script which runs after Astlinux's other startup scripts.