Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_ldap_client [2013/10/25 18:53] – [Phone LDAP Directory CLI Scripts] abelbeck
+++ userdoc:tt_ldap_client [2013/11/18 14:37] (current) – [Phone LDAP Directory CLI Scripts] abelbeck
@@ Line 92: / Line 92: @@
 !!Note: AstLinux 1.1.4 or later is required!!
-If the local LDAP Server is enabled and populated with a directory, the typical LDAP Client setting would be as follows:
+If the local LDAP Server is enabled and populated with a directory, the typical LDAP Client setting to anonymously access via localhost is as follows:
 {{:userdoc:ldap-client-system-defaults.jpg?nolink|LDAP Client Defaults}}
+\\
+\\
+**ldap-phone-num-lookup**
+  Usage: ldap-phone-num-lookup [-ht] [--tls] [-m|--match-num list] [-o|--output-name list] number
+  Options:
+      -h, --help             Show help
+      -t, --tls              Enable TLS using start_tls
+      -m, --match-num list   Comma separated list to match number. Default: telephonenumber,mobile,cellphone,homephone
+      -o, --output-name list Comma separated list to display the name. Default: displayname,cn,sn,givenname
-**ldap-phone-name-lookup**
+By default the 'number' is matched as: ''(|(telephonenumber=$number)(mobile=$number)(cellphone=$number)(homephone=$number))''
-  Usage: ldap-phone-name-lookup [--tls] name
+Standard output returns the first ''displayname/cn/sn/givenname'' that contains a matching number.
-The 'name' is filtered as: ''(|(cn=$name)(displayname=$name))''
+Use the optional ''-m|--match-num list'' and ''-o|--output-name list'' options to limit and specify the order of the matching and output.
+\\
+\\
+**ldap-phone-name-lookup**
-Standard output returns (multiple) phone numbers separated by a tilde (~).
+  Usage: ldap-phone-name-lookup [-ht] [--tls] [-m|--match-name list] [-o|--output-num list] name
+  Options:
+      -h, --help             Show help
+      -t, --tls              Enable TLS using start_tls
+      -m, --match-name list  Comma separated list to match name. Default: cn,displayname
+      -o, --output-num list  Comma separated list to display numbers. Default: telephonenumber,mobile,cellphone,homephone
-**ldap-phone-num-lookup**
+By default the 'name' is matched as: ''(|(cn=$name)(displayname=$name))''
-  Usage: ldap-phone-num-lookup [--tls] number
+Standard output returns (multiple) phone number(s) separated by a tilde (~).
-The 'number' is filtered as: ''(|(telephonenumber=$number)(mobile=$number)(cellphone=$number)(homephone=$number))''
+Use the optional ''-m|--match-name list'' and ''-o|--output-num list'' options to limit and specify the order of the matching and output.
-Standard output returns the first ''displayname/cn/sn/givenname'' that contains a matching number.
 ==== Asterisk Usage Examples ====
 Examples how the ''ldap-phone-name-lookup'' and ''ldap-phone-num-lookup'' scripts can be used an Asterisk dialplan.
+**CallerID number lookup via LDAP and AstDB**
+<code>[subCID-lookup]
+; CallerID(num) lookup, first LDAP then AstDB
+exten => s,1,NoOp(CallerID lookup, first LDAP then AstDB ...)
+ same => n,ExecIf($[ $["${CALLERID(num)}" != ""] & $["${CALLERID(name)}" = ""] ]?Set(LDAP_Name=${SHELL(ldap-phone-num-lookup '${ARG1}')})
+ same => n,ExecIf($["${LDAP_Name}" != ""]?Set(CALLERID(name)=${LDAP_Name}))
+ same => n,ExecIf($[ $["${CALLERID(num)}" != ""] & $["${CALLERID(name)}" = ""] ]?Set(CALLERID(name)=${DB(cidname/${CALLERID(num)})}))
+ same => n,Return()</code>
+And in your incoming context put this line somewhere:
+  exten => s,n,GoSub(subCID-lookup,s,1(${CALLERID(num)}))