Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_kamailio [2014/09/04 21:07]
abelbeck [Initial Configuration]
+++ userdoc:tt_kamailio [2014/09/18 15:23] (current)
droemel [Initial Configuration]
@@ Line 3: / Line 3: @@
 [[http://www.kamailio.org/|Kamailio]] (former OpenSER) is an Open Source SIP Server.
-To know Kamailio is to know SIP.
+"To know Kamailio is to know SIP." -- Fred Posner
+[[http://www.slideshare.net/oej/kamailio-a-quick-introduction|A Quick Introduction to Kamailio]], by Olle E Johansson
 !!Note: AstLinux 1.2.0 or later is required, with custom build!!
@@ Line 9: / Line 11: @@
 ==== Initial Configuration ====
-The CLI (Command Line Interface) must be used to enable, and disable kamailio.  Kamailio will be enabled if the ''/mnt/kd/kamailio/'' directory exists.  On first install, issue the command...
+The CLI (Command Line Interface) must be used to enable, and disable kamailio.  Kamailio will be enabled if the ''/mnt/kd/kamailio/kamailio.cfg'' file exists.  On first install, issue the command...
   cp -a /stat/etc/kamailio /mnt/kd/
-The ''/mnt/kd/kamailio/'' directory now exists, populated with a default configuration.  Start kamailio with the following command, this will also create a symlink from ''/etc/kamailio/'' -> ''/mnt/kd/kamailio/'' ...
+The ''/mnt/kd/kamailio/'' directory now exists, populated with a default configuration, including ''kamailio.cfg'' .  Start kamailio with the following command, this will also create a symlink from ''/etc/kamailio/'' -> ''/mnt/kd/kamailio/'' ...
   service kamailio init
@@ Line 43: / Line 45: @@
   INFO: Extra tables succesfully created.
-At this point you can customize your kamailio configuration.  Edit the /etc/kamailio/kamailio-local.cfg file to add switches such as "''#!define WITH_ASTERISK''" and interfaces to listen on.  More detailed examples are described below.  Apply any edits to the files in ''/etc/kamailio/'' with the command...
+At this point you can customize your kamailio configuration.  Edit the /etc/kamailio/kamailio-local.cfg file to add switches such as "''#!define WITH_ASTERISK''" and interfaces/ip's to listen on.  More detailed examples are described below.  Apply any edits to the files in ''/etc/kamailio/'' with the command...
   service kamailio restart
@@ Line 49: / Line 51: @@
 !!Tip ->!! The web interface may be used to Edit the configuration and Restart Kamailio.
-While the default configuration files in the ''/stat/etc/kamailio/'' directory are typically only used one time for initial configuration, the files are a good reference at times by "''diff -u''" from your custom configuration down the road.
+While the default configuration files in the ''/stat/etc/kamailio/'' directory are typically only used one time for initial configuration, the files are a good reference using "''diff -u''" with your custom configuration.
+!!Note ->!! On devices with slower storage (like Soekris net5501 and Alix 2D13) you might experience database locking issues, when using the SQlite database in some use cases.
 ==== Configuration Examples ====
-== Kamailio proxy's SIP but Asterisk does the RTP directly: ==
+\\
+**Kamailio proxy's SIP but Asterisk does the RTP directly:**
 Example: EXTIP 10.10.50.65 - DNS 'pbx4', INTIP 192.168.110.1/24 network
@@ Line 73: / Line 77: @@
 !!Note ->!! Requires firewall Pass EXT->Local UDP 10000-20000 (default asterisk rtp.conf range)
-== Kamailio proxy's SIP and RTP using rtpproxy: ==
+\\
+**Kamailio proxy's SIP and RTP using rtpproxy:**
 Example: EXTIP 10.10.50.65 - DNS 'pbx4', INTIP 192.168.110.1/24 network