Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_ipv6_tunnel_config [2011/03/11 10:30]
abelbeck
+++ userdoc:tt_ipv6_tunnel_config [2011/03/11 10:49] (current)
abelbeck
@@ Line 7: / Line 7: @@
   - Hurricane Electric www.tunnelbroker.net account (free)*
-* Note that other IPv6 Tunnel Brokers exist, and others may better suit your location.  This example will use tunnelbroker.net.
+* Note that other IPv6 Tunnel Brokers exist, and possibly may better suit your location.  This example will use tunnelbroker.net.
 Before creating your www.tunnelbroker.net account, be sure IPv4 ICMP is enabled in the Firewall sub-tab:\\
@@ Line 13: / Line 13: @@
 {{:userdoc:ipv6-tunnel-enable-ping.jpg?nolink|Enable Ping}}\\
-For reference, a YouTube screen-cast steps you through the process, around 2:10 the nitty gritty begins, "Create Regular Tunnel".
+For reference, a YouTube screen-cast steps you through the process, around 2:10 into the video the nitty gritty begins, "Create Regular Tunnel".
 **Tunnelbroker.net Tour & Tunnel Creation**\\
 http://www.youtube.com/watch?v=A1azHWSv2ok
-After you have successfully registered with tunnelbroker.net and "Create Regular Tunnel", your IPv6 tunnel configuration is shown in the format below.  The labels are the AstLinux web interface Network Tab fields that are associated with the configuration values.
+After you have successfully registered with tunnelbroker.net and completed "Create Regular Tunnel", your IPv6 tunnel configuration is shown in the format below.  The labels are the AstLinux web interface Network Tab fields that are associated with the configuration values.
 {{:userdoc:ipv6-tunnel-he.jpg?nolink|HE Config}}\\
@@ Line 26: / Line 26: @@
 Select the Network Tab in the web interface.  {{:userdoc:ipv6-tunnel-network-tab.jpg?nolink|Network Tab}}\\
-In this example, Red fields are filled in using your custom IPv6 Tunnel settings.  Blue fields are required, but are not changed when enabling IPv6.
+//Note: In this example, Red fields are to be defined using your custom IPv6 Tunnel settings.  Blue fields are required, but are not effected by enabling IPv6.//
 First select the **IP Version:** -> "IPv4 & IPv6"
@@ Line 44: / Line 44: @@
 {{:userdoc:ipv6-tunnel-interface.jpg?nolink|Interface}}\\
-Define the **IPv6 Tunnel Type:** -> "6in4-static" and enter the "Server IPv4 address" and "Client IPv6 address" exactly as defined in your tunnelbroker.net account.
+Define the **IPv6 Tunnel Type:** -> "6in4-static" and enter the "Server IPv4 address" in **Remote Server IPv4:** and "Client IPv6 address" in  **Endpoint IPv6/nn:** exactly as defined in your tunnelbroker.net account.
 {{:userdoc:ipv6-tunnel-tunnel.jpg?nolink|Tunnel}}\\
+Finally, save settings and then reboot the system.
 {{:userdoc:ipv6-tunnel-save-reboot.jpg?nolink|Save Reboot}}\\
+After the reboot is completed, test with:
+$ ping6 ipv6.google.com
+In a browser, http://test-ipv6.com should result in a 10/10 report.
+You now //(hopefully)// have IPv6 connectivity!