Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_ipv6_tunnel_config [2011/03/11 16:37] – abelbeck
+++ userdoc:tt_ipv6_tunnel_config [2011/03/11 16:49] (current) – abelbeck
@@ Line 18: / Line 18: @@
 http://www.youtube.com/watch?v=A1azHWSv2ok
-After you have successfully registered with tunnelbroker.net and "Create Regular Tunnel", your IPv6 tunnel configuration is shown in the format below.  The labels are the AstLinux web interface Network Tab fields that are associated with the configuration values.
+After you have successfully registered with tunnelbroker.net and completed "Create Regular Tunnel", your IPv6 tunnel configuration is shown in the format below.  The labels are the AstLinux web interface Network Tab fields that are associated with the configuration values.
 {{:userdoc:ipv6-tunnel-he.jpg?nolink|HE Config}}\\
@@ Line 26: / Line 26: @@
 Select the Network Tab in the web interface.  {{:userdoc:ipv6-tunnel-network-tab.jpg?nolink|Network Tab}}\\
-//In this example, Red fields are filled in using your custom IPv6 Tunnel settings.  Blue fields are required, but are not changed when enabling IPv6.//
+//Note: In this example, Red fields are to be defined using your custom IPv6 Tunnel settings.  Blue fields are required, but are not effected by enabling IPv6.//
 First select the **IP Version:** -> "IPv4 & IPv6"
@@ Line 58: / Line 58: @@
 In a browser, http://test-ipv6.com should result in a 10/10 report.
-You now have IPv6 connectivity!
+You now //(hopefully)// have IPv6 connectivity!