Both sides previous revision
Previous revision
Next revision
|
Previous revision
Next revision
Both sides next revision
|
userdoc:tt_ipv6_tunnel_config [2011/03/11 10:22] abelbeck |
userdoc:tt_ipv6_tunnel_config [2011/03/11 10:32] abelbeck |
By default you are assigned a Routed /64 prefix. If you only have one local network, that is enough. On the other hand if you have multiple local networks and you desire a /64 for IPv6 Autoconfig for each network, you will want to enable a Routed /48 prefix (if available). A Routed /48 prefix will allow you to define up to 65,536 local /64 networks. | By default you are assigned a Routed /64 prefix. If you only have one local network, that is enough. On the other hand if you have multiple local networks and you desire a /64 for IPv6 Autoconfig for each network, you will want to enable a Routed /48 prefix (if available). A Routed /48 prefix will allow you to define up to 65,536 local /64 networks. |
| |
Select the Network Tab in the web interface. | Select the Network Tab in the web interface. {{:userdoc:ipv6-tunnel-network-tab.jpg?nolink|Network Tab}}\\ |
| |
{{:userdoc:ipv6-tunnel-network-tab.jpg?nolink|Network Tab}}\\ | |
| |
In this example, Red fields are filled in using your custom IPv6 Tunnel settings. Blue fields are required, but are not changed when enabling IPv6. | In this example, Red fields are filled in using your custom IPv6 Tunnel settings. Blue fields are required, but are not changed when enabling IPv6. |
| |
First select the IP Version -> IPv4 & IPv6 | First select the **IP Version:** -> "IPv4 & IPv6" |
| |
Add the "Anycasted IPv6 Caching Nameserver" to the DNS: field, also keeping your previous IPv4 DNS nameservers. | Add the "Anycasted IPv6 Caching Nameserver" to the **DNS:** field, also keeping your previous IPv4 DNS nameservers. |
| |
{{:userdoc:ipv6-tunnel-static.jpg?nolink|Static}}\\ | {{:userdoc:ipv6-tunnel-static.jpg?nolink|Static}}\\ |
| |
| Set **IPv6 Autoconfig:** -> "enabled" for the desired local interface. |
| |
| Define your local IPv6 address for the interface in the **IPv6/nn:** field. Either use your given Routed /64 prefix followed by a "1" address, or define your own /64 address from your Routed /48 prefix. In either case, your address should be of the form: |
| |
| 2001:470:xxxx:xxxx::1/64 |
| |
| IPv6 Address Reference: http://en.wikipedia.org/wiki/IPv6_address |
| |
{{:userdoc:ipv6-tunnel-interface.jpg?nolink|Interface}}\\ | {{:userdoc:ipv6-tunnel-interface.jpg?nolink|Interface}}\\ |
| |
| Define the **IPv6 Tunnel Type:** -> "6in4-static" and enter the "Server IPv4 address" in **Remote Server IPv4:** and "Client IPv6 address" in **Endpoint IPv6/nn:** exactly as defined in your tunnelbroker.net account. |
| |
{{:userdoc:ipv6-tunnel-tunnel.jpg?nolink|Tunnel}}\\ | {{:userdoc:ipv6-tunnel-tunnel.jpg?nolink|Tunnel}}\\ |