userdoc:tt_edgerouter-x

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
userdoc:tt_edgerouter-x [2018/12/27 09:33]
abelbeck [EdgeRouter-X VPN Endpoint] 		userdoc:tt_edgerouter-x [2022/08/29 06:57]
mkeuter
Line 60: Line 60:
  
 With the "System Load Linux to SDRAM via TFTP" chosen, you need to specify two IP addresses and the name of the TFTP filename ''openwrt.bin'', as show above. With the "System Load Linux to SDRAM via TFTP" chosen, you need to specify two IP addresses and the name of the TFTP filename ''openwrt.bin'', as show above.
 +
 +!!Note:!! Some OpenWRT devices work only with 192.168.1.1 + 192.168.1.2 as IP addresses!
  
 Type RETURN and the ER-X should reboot into the factory initramfs-kernel of OpenWrt.  After the dmesg logs appear to stop, type RETURN again, you should see a login as shown below: Type RETURN and the ER-X should reboot into the factory initramfs-kernel of OpenWrt.  After the dmesg logs appear to stop, type RETURN again, you should see a login as shown below:
  • userdoc/tt_edgerouter-x.txt
  • Last modified: 2022/08/29 07:23
  • by mkeuter