Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
userdoc:tt_cf_usb_combo_booting [2011/10/28 11:03] abelbeck |
userdoc:tt_cf_usb_combo_booting [2017/05/21 03:45] (current) droemel |
====== CF + USB Combo Booting ====== | ====== CF + USB Combo Booting ====== |
| |
| !!Note:!! Not supported anymore with AstLinux 1.3.x and newer! |
| |
A new feature implemented with runnix-0.3.3 and AstLinux 0.7.8 allows the AstLinux distribution to be placed on a USB flash drive and operate just as if it were on a CF card. | A new feature implemented with runnix-0.3.3 and AstLinux 0.7.8 allows the AstLinux distribution to be placed on a USB flash drive and operate just as if it were on a CF card. |
For the case where the AstLinux system box cannot boot directly to a USB drive, there is a solution for that, by using the CF card to "boot" the USB flash drive, "CF + USB Combo Booting". Follow steps #1 through #4 below. | For the case where the AstLinux system box cannot boot directly to a USB drive, there is a solution for that, by using the CF card to "boot" the USB flash drive, "CF + USB Combo Booting". Follow steps #1 through #4 below. |
| |
- Raw byte transfer ('dd', physdiskwrite, etc.) a RUNNIX-bootonly image to a CF card. The RUNNIX-bootonly image is available here: http://mirror.astlinux.org/runnix-bootonly/ | - Raw byte transfer ('dd', physdiskwrite, etc.) a RUNNIX-bootonly image to a CF card. The RUNNIX-bootonly images are available here: |
- Raw byte transfer ('dd', physdiskwrite, etc.) an AstLinux image to a USB flash drive. | * http://mirror.astlinux-project.org/runnix-bootonly/runnix-0.4-5781-bootonly.img.gz |
- Mount the USB drive on a common OS (OS X, Linux, etc.). (Note: Not required with AstLinux 1.x) | * http://mirror.astlinux-project.org/runnix-bootonly/runnix-0.4-5781-bootonly-serial.img.gz |
| - Raw byte transfer ('dd', physdiskwrite, etc.) a complete AstLinux image to a USB flash drive. |
| - Mount the USB drive on a common OS (OS X, Linux, etc.). |
- In the "os" directory edit the text file "astlinux-xxxxx.run.conf", the line beginning with KCMD=, add the space separated option rootdelay=10 after the 'astlive' value in the line. | - In the "os" directory edit the text file "astlinux-xxxxx.run.conf", the line beginning with KCMD=, add the space separated option rootdelay=10 after the 'astlive' value in the line. |
- Eject the USB drive, remove the drive. | - Eject the USB drive, remove the drive. |
| |
Note: With runnix-0.3.3 and later, advanced users will notice that this 'secondary' (Combo Booting) disk simply requires the AstLinux "os" distribution directory and a dosfslabel of RUNNIX on a small (128MB) FAT16 (or FAT32) partition together with a CF card with a RUNNIX-bootonly image. The remainder of the unformatted 'secondary' disk will be formatted during the AstLinux setup process. This would apply for any read-write media type, even for media types where a raw byte transfer of the AstLinux flash image would not be appropriate. | Note: With runnix-0.3.3 and later, advanced users will notice that this 'secondary' (Combo Booting) disk simply requires the AstLinux "os" distribution directory and a dosfslabel of RUNNIX on a small (128MB) FAT16 (or FAT32) partition together with a CF card with a RUNNIX-bootonly image. The remainder of the unformatted 'secondary' disk will be formatted during the AstLinux setup process. This would apply for any read-write media type, even for media types where a raw byte transfer of the AstLinux flash image would not be appropriate. |
| |