| Both sides previous revision
Previous revision
|
Last revision
Both sides next revision
|
userdoc:tt_cf_usb_combo_booting [2012/12/02 07:43]
abelbeck |
userdoc:tt_cf_usb_combo_booting [2016/06/19 22:12]
abelbeck |
| |
| - Raw byte transfer ('dd', physdiskwrite, etc.) a RUNNIX-bootonly image to a CF card. The RUNNIX-bootonly images are available here: | - Raw byte transfer ('dd', physdiskwrite, etc.) a RUNNIX-bootonly image to a CF card. The RUNNIX-bootonly images are available here: |
| * http://mirror.astlinux.org/runnix-bootonly/runnix-0.4-5781-bootonly.img.gz | * http://mirror.astlinux-project.org/runnix-bootonly/runnix-0.4-5781-bootonly.img.gz |
| * http://mirror.astlinux.org/runnix-bootonly/runnix-0.4-5781-bootonly-serial.img.gz | * http://mirror.astlinux-project.org/runnix-bootonly/runnix-0.4-5781-bootonly-serial.img.gz |
| - Raw byte transfer ('dd', physdiskwrite, etc.) a complete AstLinux image to a USB flash drive. | - Raw byte transfer ('dd', physdiskwrite, etc.) a complete AstLinux image to a USB flash drive. |
| - Mount the USB drive on a common OS (OS X, Linux, etc.). | - Mount the USB drive on a common OS (OS X, Linux, etc.). |
| |
| Note: With runnix-0.3.3 and later, advanced users will notice that this 'secondary' (Combo Booting) disk simply requires the AstLinux "os" distribution directory and a dosfslabel of RUNNIX on a small (128MB) FAT16 (or FAT32) partition together with a CF card with a RUNNIX-bootonly image. The remainder of the unformatted 'secondary' disk will be formatted during the AstLinux setup process. This would apply for any read-write media type, even for media types where a raw byte transfer of the AstLinux flash image would not be appropriate. | Note: With runnix-0.3.3 and later, advanced users will notice that this 'secondary' (Combo Booting) disk simply requires the AstLinux "os" distribution directory and a dosfslabel of RUNNIX on a small (128MB) FAT16 (or FAT32) partition together with a CF card with a RUNNIX-bootonly image. The remainder of the unformatted 'secondary' disk will be formatted during the AstLinux setup process. This would apply for any read-write media type, even for media types where a raw byte transfer of the AstLinux flash image would not be appropriate. |
| |