Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
userdoc:tt_cf_usb_combo_booting [2012/04/24 15:54] droemel |
userdoc:tt_cf_usb_combo_booting [2017/05/21 03:45] droemel |
====== CF + USB Combo Booting ====== | ====== CF + USB Combo Booting ====== |
| |
| !!Note:!! Not supported anymore with AstLinux 1.3.x and newer! |
| |
A new feature implemented with runnix-0.3.3 and AstLinux 0.7.8 allows the AstLinux distribution to be placed on a USB flash drive and operate just as if it were on a CF card. | A new feature implemented with runnix-0.3.3 and AstLinux 0.7.8 allows the AstLinux distribution to be placed on a USB flash drive and operate just as if it were on a CF card. |
| |
- Raw byte transfer ('dd', physdiskwrite, etc.) a RUNNIX-bootonly image to a CF card. The RUNNIX-bootonly images are available here: | - Raw byte transfer ('dd', physdiskwrite, etc.) a RUNNIX-bootonly image to a CF card. The RUNNIX-bootonly images are available here: |
* http://mirror.astlinux.org/runnix-bootonly/runnix-0.4-5339-bootonly.img.gz | * http://mirror.astlinux-project.org/runnix-bootonly/runnix-0.4-5781-bootonly.img.gz |
* http://mirror.astlinux.org/runnix-bootonly/runnix-0.4-5339-bootonly-serial.img.gz | * http://mirror.astlinux-project.org/runnix-bootonly/runnix-0.4-5781-bootonly-serial.img.gz |
- Raw byte transfer ('dd', physdiskwrite, etc.) a complete AstLinux image to a USB flash drive. | - Raw byte transfer ('dd', physdiskwrite, etc.) a complete AstLinux image to a USB flash drive. |
- Mount the USB drive on a common OS (OS X, Linux, etc.). | - Mount the USB drive on a common OS (OS X, Linux, etc.). |
| |
Note: With runnix-0.3.3 and later, advanced users will notice that this 'secondary' (Combo Booting) disk simply requires the AstLinux "os" distribution directory and a dosfslabel of RUNNIX on a small (128MB) FAT16 (or FAT32) partition together with a CF card with a RUNNIX-bootonly image. The remainder of the unformatted 'secondary' disk will be formatted during the AstLinux setup process. This would apply for any read-write media type, even for media types where a raw byte transfer of the AstLinux flash image would not be appropriate. | Note: With runnix-0.3.3 and later, advanced users will notice that this 'secondary' (Combo Booting) disk simply requires the AstLinux "os" distribution directory and a dosfslabel of RUNNIX on a small (128MB) FAT16 (or FAT32) partition together with a CF card with a RUNNIX-bootonly image. The remainder of the unformatted 'secondary' disk will be formatted during the AstLinux setup process. This would apply for any read-write media type, even for media types where a raw byte transfer of the AstLinux flash image would not be appropriate. |
| |