Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_cf_usb_combo_booting [2012/04/24 10:42]
abelbeck
+++ userdoc:tt_cf_usb_combo_booting [2012/12/02 07:43]
abelbeck
@@ Line 7: / Line 7: @@
 For the case where the AstLinux system box cannot boot directly to a USB drive, there is a solution for that, by using the CF card to "boot" the USB flash drive, "CF + USB Combo Booting".  Follow steps #1 through #4 below.
-  - Raw byte transfer ('dd', physdiskwrite, etc.) a RUNNIX-bootonly image to a CF card.  The RUNNIX-bootonly image is available here: http://mirror.astlinux.org/runnix-bootonly/runnix-0.4-5339-bootonly.img.gz http://mirror.astlinux.org/runnix-bootonly/runnix-0.4-5339-bootonly-serial.img.gz
+  - Raw byte transfer ('dd', physdiskwrite, etc.) a RUNNIX-bootonly image to a CF card.  The RUNNIX-bootonly images are available here:
-  - Raw byte transfer ('dd', physdiskwrite, etc.) an AstLinux image to a USB flash drive.
+    * http://mirror.astlinux.org/runnix-bootonly/runnix-0.4-5781-bootonly.img.gz
+    * http://mirror.astlinux.org/runnix-bootonly/runnix-0.4-5781-bootonly-serial.img.gz
+  - Raw byte transfer ('dd', physdiskwrite, etc.) a complete AstLinux image to a USB flash drive.
   - Mount the USB drive on a common OS (OS X, Linux, etc.).
     - In the "os" directory edit the text file "astlinux-xxxxx.run.conf", the line beginning with KCMD=, add the space separated option rootdelay=10 after the 'astlive' value in the line.