Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
userdoc:tt_avahi_mdns [2016/06/18 21:18] abelbeck [mDNS/Bonjour Printer Discovery Example] |
userdoc:tt_avahi_mdns [2016/06/19 07:22] (current) abelbeck [mDNS/Bonjour Printer Discovery Example] |
||
---|---|---|---|
Line 53: | Line 53: | ||
The following is an example how to use the Avahi mDNS/ | The following is an example how to use the Avahi mDNS/ | ||
- | Lets assume your main network is '' | + | Lets assume your main network is '' |
- | Now assume you configure a guest VLAN that is network '' | + | Now assume you configure a guest VLAN that is network '' |
With that environment perform the following setup... | With that environment perform the following setup... | ||
Line 91: | Line 91: | ||
Save this file and now go to the Network tab -> Firewall Configuration sub-tab and add the following as "Pass LAN-> | Save this file and now go to the Network tab -> Firewall Configuration sub-tab and add the following as "Pass LAN-> | ||
- | Action: Pass LAN->LAN | Protocol: TCP | Source: 192.168.yy.0/24 | Destination: | + | Action: Pass LAN->LAN | Protocol: TCP | Source: 192.168.102.0/24 | Destination: |
- | Action: Pass LAN->LAN | Protocol: TCP | Source: 192.168.yy.0/24 | Destination: | + | Action: Pass LAN->LAN | Protocol: TCP | Source: 192.168.102.0/24 | Destination: |
The first rule corresponds to the printer protocols that we are publishing across the LANs and allows any device on the guest LAN to connect to our printer on our main network. | The first rule corresponds to the printer protocols that we are publishing across the LANs and allows any device on the guest LAN to connect to our printer on our main network. | ||
+ | |||
+ | !!Tip ->!! The firewall rules above could use '' | ||
Restart mDNS/DNS-SD and restart the firewall. | Restart mDNS/DNS-SD and restart the firewall. |