userdoc:tt_asterisk_snmp_monitoring

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
userdoc:tt_asterisk_snmp_monitoring [2013/05/08 20:22] – [Asterisk SNMP Configuration] abelbeckuserdoc:tt_asterisk_snmp_monitoring [2016/06/28 23:48] (current) – [System SNMP Configuration] abelbeck
Line 21: Line 21:
      
   syslocation Omaha, NE   syslocation Omaha, NE
-  syscontact AstLinux - www.astlinux.org+  syscontact AstLinux - www.astlinux-project.org
      
   agentaddress udp:127.0.0.1:161   agentaddress udp:127.0.0.1:161
Line 30: Line 30:
      
   sysObjectID .1.3.6.1.4.1.22736.1   sysObjectID .1.3.6.1.4.1.22736.1
-  mibs +ASTERISK-MIB+
  
 Edit ''syslocation'' and ''syscontact'' for your location. Edit ''syslocation'' and ''syscontact'' for your location.
  
-Apply snmpd.conf changes, restart snmpd service using CLI:+Apply ''snmpd.conf'' changes, restart snmpd service using CLI:
  
   service snmpd stop   service snmpd stop
   service snmpd init   service snmpd init
  
-With the system snmpd.conf changes applied, you should see useful information with the following commands.+With the system ''snmpd.conf'' changes applied, you should see useful information with the following commands.
  
 Example snmp commands using CLI: Example snmp commands using CLI:
  • userdoc/tt_asterisk_snmp_monitoring.1368044548.txt.gz
  • Last modified: 2013/05/08 20:22
  • by abelbeck