Differences

This shows you the differences between two versions of the page.

--- userdoc:tt_asterisk_snmp_monitoring [2013/05/08 15:18]
abelbeck [System SNMP Configuration]
+++ userdoc:tt_asterisk_snmp_monitoring [2013/05/08 15:23]
abelbeck [System SNMP Configuration]
@@ Line 34: / Line 34: @@
 Edit ''syslocation'' and ''syscontact'' for your location.
-Apply snmpd.conf changes, restart snmpd service using CLI:
+Apply ''snmpd.conf'' changes, restart snmpd service using CLI:
   service snmpd stop
   service snmpd init
-With the system snmpd.conf changes applied, you should see useful information with the following commands.
+With the system ''snmpd.conf'' changes applied, you should see useful information with the following commands.
 Example snmp commands using CLI:
@@ Line 72: / Line 72: @@
   enabled = yes
-Apply the res_snmp.conf change in Asterisk, unload and load the res_snmp.so module, or restart the asterisk service.
+Apply the ''res_snmp.conf'' change in Asterisk, unload and load the ''res_snmp.so'' module, or restart the asterisk service.
-With both the system snmpd.conf and Asterisk res_snmp.conf changes applied, you should see useful information with the following commands.
+With both the system ''snmpd.conf'' and Asterisk ''res_snmp.conf'' changes applied, you should see useful information with the following commands.
 Example snmp commands using CLI: