Differences

This shows you the differences between two versions of the page.

--- userdoc:tt-web-browser-proxy [2015/07/29 11:14]
abelbeck [Establish local SOCKS Proxy]
+++ userdoc:tt-web-browser-proxy [2021/02/26 10:00] (current)
mkeuter [Disconnect local SOCKS Proxy]
@@ Line 3: / Line 3: @@
 There may be special situations where you would like to virtually make your web browser appear "inside" a remote AstLinux box to access the web interface of a network device.  In the old days command line browsers like 'lynx' and 'links' could get a basic task accomplished, but today a modern browser is needed to manage an IP Phone or network switch that is hidden behind the remote AstLinux firewall.
-In theory AstLinux VPN's can be configured to access such "hidden" remote web interfaces, but often it is not worth the trouble, or for security or access reasons, some devices may not be directly reachable via the VPN.
+In theory AstLinux VPNs can be configured to access such "hidden" remote web interfaces, but often it is not worth the trouble, or for security or access reasons, some devices may not be directly reachable via the VPN.
 Assuming you have SSH access to the remote AstLinux box itself, either directly or via a VPN, you can very easily enable a local SOCKS Proxy on your web browser machine and use SSH to tunnel the proxy to your remote AstLinux box.
 The following example is demonstrated by using Firefox on Mac OS X, but should work with about any modern web browser and an Operating System which supports SSH such as OS X, Linux, ChromeOS (in developer mode), etc. .
 ===== Establish local SOCKS Proxy =====
-Modern SSH commands have built-in support for establishing a local SOCKS server which then can be tunneled to a remote SSH server.  The option syntax is:
+Modern SSH clients have built-in support for establishing a local SOCKS server which then can be tunneled to a remote SSH server.  The option syntax is:
 **-D Local_Port**
@@ Line 17: / Line 18: @@
-To establish a local SOCKS Proxy, on your Mac in the terminal type:
+To establish a local SOCKS Proxy...
+Go to Terminal:
   ssh -D5000 root@pbx
@@ Line 29: / Line 32: @@
 {{:userdoc:web-browser-proxy-firefox.jpg?nolink|Firefox Proxy}}
-Add the "SOCKS Host:" entry for "localhost" and port "5000".  Check "Remote DNS" if you also want DNS proxied.
+Select "Manual ...", and add the "SOCKS Host:" entry for "localhost" and port "5000".  Check "Remote DNS" if you also want DNS proxied.
 Click "OK"
 Open a new Firefox window, and enter "192.168.101.1" or some unique address as seen by "pbx".  You should be able to access any web enabled device that "pbx" can see.  If you have problems, look at your Terminal window for error messages.
+!!Note ->!! Make sure that you don't have any conflicting "Proxy add-on extensions" active in Firefox, that could interfere with the standard proxy configuration!
 ===== Disconnect local SOCKS Proxy =====
@@ Line 47: / Line 53: @@
 Type "exit", it should exit immediately, but if there are SOCKS sessions still active it may take a minute but will eventually exit by itself.
+\\
+!!Tip ->!! In order to simplify enabling and disabling the web browser proxy settings, most browsers have add-on extensions that allow quickly changing the proxy settings from the browser window without digging into Preferences each time (e.g. "Toggle Proxy" for Firefox)
+Now for Firefox + Chrome "MM3-ProxySwitch"
+https://proxy-offline-browser.com/ProxySwitch/