Differences

This shows you the differences between two versions of the page.

--- userdoc:tt-netboot [2012/11/19 09:05]
abelbeck
+++ userdoc:tt-netboot [2012/11/19 09:27] (current)
abelbeck
@@ Line 43: / Line 43: @@
 ==== Enabling Netboot in BIOS ====
-Some x86 boards have netboot enabled by default in their BIOS, many do not.  For example with the Jetway line of boards using AMI BIOS, netboot may be enabled on a LAN by LAN basis.
+Some x86 boards have netboot enabled by default in their BIOS, many do not.  For example with the Jetway line of boards using AMI BIOS, netboot may be enabled on a NIC by NIC basis.
-\\
+**Jetway Board Example**
+Enter the **Setup** page in the BIOS by typing ''DEL'' via VGA Console or ''F4 (<ESC>OS)'' via Serial Console.
+Navigate to Integrated Peripherals -> Onboard Device Function, then set "Onboard LAN1 BootROM [Enabled]" in the BIOS for one or more NICs (LAN1, LAN2, etc.).
+Finally, with netboot enabled in the BIOS, you can select the Boot Menu at startup by typing ''F11'' via VGA Console or ''F3 (<ESC>OR)'' via Serial Console.  Then you can select the NIC to netboot from.
+\\