Differences

This shows you the differences between two versions of the page.

--- userdoc:tt-netboot [2012/11/19 15:09] – abelbeck
+++ userdoc:tt-netboot [2012/11/19 15:27] (current) – abelbeck
@@ Line 45: / Line 45: @@
 Some x86 boards have netboot enabled by default in their BIOS, many do not.  For example with the Jetway line of boards using AMI BIOS, netboot may be enabled on a NIC by NIC basis.
-When you enable "Onboard LAN1 BootROM [enable]" in the BIOS for one or more NICs, you can get a Boot Menu over the serial port, when you\\
+**Jetway Board Example**
-type F3 (<ESC>OR) on startup((F11 over VGA)). Then you can select the NIC to netboot from.
-\\
+Enter the **Setup** page in the BIOS by typing ''DEL'' via VGA Console or ''F4 (<ESC>OS)'' via Serial Console.
+Navigate to Integrated Peripherals -> Onboard Device Function, then set "Onboard LAN1 BootROM [Enabled]" in the BIOS for one or more NICs (LAN1, LAN2, etc.).
+Finally, with netboot enabled in the BIOS, you can select the Boot Menu at startup by typing ''F11'' via VGA Console or ''F3 (<ESC>OR)'' via Serial Console.  Then you can select the NIC to netboot from.
+\\